

- 5962-9682501QDA - 集成电路(IC) > 逻辑 > 门和反相器
- LM78L12ACZ/LFT1 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- TPS73201DRBT - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- LM3S1637-IQC50-A2T - 集成电路(IC) > 嵌入式 > 微控制器
- TPS65231A2DCAR - 集成电路(IC) > 电源管理(PMIC) > 特殊用途稳压器
- TRSF23243IDGGRG4 - 接口 - 驱动器,接收器,收发器
- UCC3806PW - 集成电路(IC) > 电源管理(PMIC) > DC-DC 开关控制器
- TUSB8020BEVM - 开发板,套件,编程器 > 评估板 > 评估和演示板及套件
- ADS117L11IRUKT - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- SER24-35OVT/NOPB - 评估和演示板及套件
- UC3854ADWG4 - 集成电路(IC) > 电源管理(PMIC) > PFC(功率因数校正)
- CDC339DBRG4 - 时钟-计时 - 时钟缓冲器,驱动器
- LM2991T - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- SN74AC165WBQBRQ1 - 集成电路(IC) > 逻辑 > 移位寄存器
- CY74FCT191CTSOCTG4 - 逻辑 - 计数器,除法器
- INA105KUE4 - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- MSP430F67651AIPZR - 集成电路(IC) > 嵌入式 > 微控制器
- SN74LVC1G14DBVTG4 - 集成电路(IC) > 逻辑 > 门和反相器
- LM4838MTX/NOPB - 集成电路(IC) > 线性 > 放大器 > 音频放大器
- HPA00577DGNR - 线性 - 放大器 - 音频



ADC12038 - 具有 MUX 和采样/保持功能的自校准 12 位 + 串行 I/O A/D 转换器
ADC12038是TI德州仪器公司的一款精密ADC(<=10MSPS)产品,ADC12038是具有 MUX 和采样/保持功能的自校准 12 位 + 串行 I/O A/D 转换器,本站介绍了ADC12038的封装应用图解、特点和优点、功能等,并给出了与ADC12038相关的TI元器件型号供参考。
ADC12038 - 具有 MUX 和采样/保持功能的自校准 12 位 + 串行 I/O A/D 转换器 - 精密ADC(<=10MSPS) - 模数转换器 - 德州仪器
NOTE: Some of these devices may be obsolete and are described and shown here for reference only. See our web site for product availability.
The ADC12030, and ADC12H030 families are 12-bit plus sign successive approximation Analog-to-Digital Converters with serial I/O and configurable input multiplexers. The ADC12034/ADC12H034 and ADC12038/ADC12H038 have 4 and 8 channel multiplexers, respectively. The differential multiplexer outputs and ADC inputs are available on the MUXOUT1, MUXOUT2, A/DIN1 and A/DIN2 pins. The ADC12030/ADC12H030 has a two channel multiplexer with the multiplexer outputs and ADC inputs internally connected. The ADC12030 family is tested with a 5 MHz clock, while the ADC12H030 family is tested with an 8 MHz clock. On request, these ADCs go through a self calibration process that adjusts linearity, zero and full-scale errors to less than ±1 LSB each.
The analog inputs can be configured to operate in various combinations of single-ended, differential, or pseudo-differential modes. A fully differential unipolar analog input range (0V to +5V) can be accommodated with a single +5V supply. In the differential modes, valid outputs are obtained even when the negative inputs are greater than the positive because of the 12-bit plus sign output data format.
The serial I/O is configured to comply with NSC MICROWIRE. For voltage references see the LM4040, LM4050 or LM4041.
- Serial I/O (MICROWIRE Compatible)
- 2, 4, or 8 Chan Differential or Single-Ended Multiplexer
- Analog Input Sample/Hold Function
- Power Down Mode
- Variable Resolution and Conversion Rate
- Programmable Acquisition Time
- Variable Digital Output Word Length and Format
- No Zero or Full Scale Adjustment Required
- Fully Tested and Ensured with a 4.096V Reference
- 0V to 5V Analog Input Range with Single 5V Power Supply
- No Missing Codes over Temperature
Key Specifications
- Resolution 12-bit plus sign
- 12-bit plus sign conversion time
- ADC12H30 family 5.5 μs (max)
- ADC12030 family 8.8 μs (max)
- 12-bit plus sign throughput time
- ADC12H30 family 8.6 μs (max)
- ADC12030 family 14 μs (max)
- Integral Linearity Error ±1 LSB (max)
- Single Supply 5V ±10%
- Power consumption 33 mW (max)
- Power down 100 μW (typ)
- SN74LS673 - 具有输出存储寄存器的串行输入移位寄存器
- LDC1314 - 具有 I2C 的四通道、12 位电感数字转换器
- ISO3086T - 具有集成变压器驱动器的隔离式 485 收发器
- SN74LS132 - 四路 2 输入正与非施密特触发器
- ADS7827 - 5.25V-2.7V 8 位 250KSPS 同步串行 ADC
- TPS61028 - 采用 QFN-10 封装的可调节 800mA 开关、96% 高效升压转换器,具有 LDO 降压模式
- TL16C550C - 具有 16 字节 FIFO 及自动流控制的单路 UART
- CD54HC4052 - 高速 CMOS 逻辑模拟多路复用器/多路解复用器
- SN74GTLP22033 - 具有独立 LVTTL 端口和反馈路径的 8 位 LVTTL-GTLP 可调节边沿速率寄存收发器
- TPS62044 - 1.8V 1.2A 输出 95% 效率步降转换器,静态电流 18uA,采用 MSOP-10 封装



