• Ultrasmall X2QFN Package 2 mm × 1.5 mm × 0.4 mm
• 12-Bit Noise-Free Resolution
• Wide Supply Range: 2 V to 5.5 V
• Low Current Consumption:
  • Continuous Mode: Only 150 μA
  • Single-Shot Mode: Automatic Power-Down
• Programmable Data Rate: 128 SPS to 3300 SPS
• Single-Cycle Settling
• Internal Low-Drift Voltage Reference
• Internal Temperature Sensor: 2°C (max) Error
• Internal Oscillator
• Internal PGA
• Four Single-Ended or Two Differential Inputs
• Specified Temperature: –40°C to +125°C

• Temperature Measurement:
  • Thermocouple Measurement
  • Cold-Junction Compensation
  • Thermistor Measurement
• Portable Instrumentation
• Factory Automation and Process Controls

The ADS1018 is a precision, low-power, 12-bit, noise-free, analog-to-digital converter (ADC) that provides all features necessary to measure the most common sensor signals in an ultrasmall, leadless, X2QFN-10 or VSSOP-10 package. The ADS1018 integrates a programmable gain amplifier (PGA), voltage reference, oscillator and high-accuracy temperature sensor. These features, along with a wide power-supply range from 2 V to 5.5 V, make the ADS1018 ideally suited for power- and space-constrained, sensor-measurement applications.

The ADS1018 performs conversions at data rates up to 3300 samples per second (SPS). The PGA offers input ranges from ±256 mV to ±6.144 V, allowing both large and small signals to be measured with high resolution. An input multiplexer (mux) allows measurement of two differential or four single-ended inputs. The high-accuracy temperature sensor is used for system-level temperature monitoring, or cold-junction compensation for thermocouples.

The ADS1018 operates either in continuous-conversion mode, or in a single-shot mode that automatically powers down after a conversion. Single-shot mode significantly reduces current consumption during idle periods. Data are transferred through a serial peripheral interface (SPI™).