ADS1282是TI公司的一款震动信号调节产品，ADS1282是用于地震监测和能源开发的具有 PGA 的超高分辨率 Σ-Δ ADC，本页介绍了ADS1282的产品说明、应用、特性等，并给出了与ADS1282相关的TI元器件型号供参考。
ADS1282 - 用于地震监测和能源开发的具有 PGA 的超高分辨率 Σ-Δ ADC - 震动信号调节 - 其他传感器信号调节器 - TI公司（Texas Instruments，德州仪器）
The ADS1282 is an extremely high-performance, single-chip analog-to-digital converter (ADC) with an integrated, low-noise programmable gain amplifier (PGA) and two-channel input multiplexer (mux). The ADS1282 is suitable for the demanding needs of energy exploration and seismic monitoring environments.
The converter uses a fourth-order, inherently stable, delta-sigma (ΔΣ) modulator that provides outstanding noise and linearity performance. The modulator is used either in conjunction with the on-chip digital filter, or can be bypassed for use with post processing filters.
The flexible input MUX provides an additional external input for measurement, as well as internal self-test connections. The PGA features outstanding low noise (5 nV/√Hz) and high input impedance, allowing easy interfacing to geophones and hydrophones over a wide range of gains.
The digital filter provides selectable data rates from 250 to 4000 samples per second (SPS). The high-pass filter (HPF) features an adjustable corner frequency. On-chip gain and offset scaling registers support system calibration.
The synchronization input (SYNC) can be used to synchronize the conversions of multiple ADS1282s. The SYNC input also accepts a clock input for continuous alignment of conversions from an external source.
Together, the amplifier, modulator, and filter dissipate 25 mW. The ADS1282 is available in a compact TSSOP-28 package and is fully specified from –40°C to +85°C, with a maximum operating range to +125°C.
- High Resolution: 130-dB SNR (250 SPS)
- High Accuracy: THD: –122 dB INL: 0.5 ppm
- Low-Noise PGA
- Two-Channel Input Mux
- Inherently-Stable Modulator with Fast Responding Overrange Detection
- Flexible Digital Filter: Sinc + FIR + IIR (Selectable) Linear or Minimum Phase Response Programmable High-Pass Filter Selectable FIR Data Rates: 250 SPS to 4 kSPS
- Filter Bypass Option
- Low Power Consumption: 25 mW Shutdown: 10 µW
- Offset and Gain Calibration Engine
- SYNC Input
- Analog Supply: Unipolar (+5 V) or Bipolar (±2.5 V)
- Digital Supply: 1.8 V to 3.3 V
