

- ADC0801LCN/NOPB - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- MSP430FR6872IPMR - 集成电路(IC) > 嵌入式 > 微控制器
- TLC2252QPWRG4Q1 - 线性器件 - 放大器 - 仪器、运算放大器、缓冲放大器
- SNJ54HC242J - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- SN54LS03J - 集成电路(IC) > 逻辑 > 门和反相器
- ADS8910BRGET - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- V62/03626-02XE - 集成电路(IC) > 接口 > UART(通用异步接收器发送器)
- TPS76901DBVR - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- TPSI3052SQDWZRQ1 - 隔离器 > 隔离器 - 栅极驱动器
- LM3940IT-3.3/NOPB - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- TPS659106A1RSL - 集成电路(IC) > 电源管理(PMIC) > 电源管理 - 专用
- SN74AUP1G97DCKR - 集成电路(IC) > 逻辑 > 门和反相器 - 多功能,可配置
- SN74AC3G97PWR - 集成电路(IC) > 逻辑 > 门和反相器 - 多功能,可配置
- MSP430F478IPN - 集成电路(IC) > 嵌入式 > 微控制器
- TLV2302IDR - 集成电路(IC) > 线性 > 放大器 > 特殊用途放大器
- TPS35BA38AAADDFRQ1 - 集成电路(IC) > 电源管理(PMIC) > 监控器
- SN65MLVD204ADRG4 - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- TLV9021QDCKRQ1 - 集成电路(IC) > 线性 > 比较器
- TMDXIDDK377D - 开发板,套件,编程器 > 评估板 > 评估和演示板及套件
- BQ24012DRCR - 集成电路(IC) > 电源管理(PMIC) > 电池充电器



ADS805 - 12 位 20 MSPS ADC,具有 内部/外部参考、2 至 5Vpp 之间的灵活 I/P、超出范围指示信号和引脚兼容
ADS805是TI德州仪器公司的一款高速ADC(>10MSPS)产品,ADS805是12 位 20 MSPS ADC,具有 内部/外部参考、2 至 5Vpp 之间的灵活 I/P、超出范围指示信号和引脚兼容,本站介绍了ADS805的封装应用图解、特点和优点、功能等,并给出了与ADS805相关的TI元器件型号供参考。
ADS805 - 12 位 20 MSPS ADC,具有 内部/外部参考、2 至 5Vpp 之间的灵活 I/P、超出范围指示信号和引脚兼容 - 高速ADC(>10MSPS) - 模数转换器 - 德州仪器
The ADS805 is a 20MHz, high dynamic range, 12-bit, pipelined Analog-to-Digital Converter ADC. This converter includes a high-bandwidth track-and-hold that gives excellent spurious performance up to and beyond the Nyquist rate. This high-bandwidth, linear track-and-hold minimizes harmonics and has low jitter, leading to excellent Signal-to-Noise Ratio (SNR) performance. The ADS805 is also pin-compatible with the 10MHz ADS804 and the 5MHz ADS803.
The ADS805 provides an internal reference or an external reference can be used. The ADS805 can be programmed for a 2Vp-p input range which is the easiest to drive with a single op amp and provides the best spurious performance. Alternatively, the 5Vp-p input range can be used for the lowest input-referred noise of 0.09LSBs rms giving superior imaging performance. There is also the capability to set the input range between 2Vp-p and 5Vp-p, either single-ended or differential. The ADS805 also provides an over-range flag that indicates when the input signal has exceeded the converters full-scale range. This flag can also be used to reduce the gain of the front end signal conditioning circuitry.
The ADS805 employs digital error techniques to provide excellent differential linearity for demanding imaging applications. Its low distortion and high SNR give the extra margin needed for communications, medical imaging, video, and test instrumentation applications. The ADS805 is available in an SSOP-28 package.
- HIGH SFDR: 74dB at 9.8MHz fIN
- HIGH SNR: 68dB
- LOW POWER: 300mW
- LOW DLE: 0.25LSB
- FLEXIBLE INPUT RANGE
- OVER-RANGE INDICATOR
- APPLICATIONS
- STUDIO CAMERAS
- IF AND BASEBAND DIGITIZATION
- COPIERS
- TEST INSTRUMENTATION
- LM2597HV - 具有多种特性的 SIMPLE SWITCHER 电源转换器 150 kHz 0.5A 降压电压稳压器
- TLV320AIC3254-Q1 - 采用 miniDSP 和 Power TuneTM 技术的汽车类、超低功耗立体声音频编解码器
- BQ771600 - 用于 2 至 4 节锂离子电池(具有外部延迟电容器)的过压保护
- LMR64010 - 采用 SOT-23 封装的 SIMPLE SWITCHER? 2.7V 至 14V、1A 升压稳压器
- MSP430FR5967 - Wolverine 混合信号微控制器
- SN74LVC573A-Q1 - 汽车类具有三态输出的八路透明 D 类锁存器
- SN54HC138 - 3 线路至 8 线路解码器/多路解复用器
- TPS2110A - 自动切换功率 MUX
- MSP430F5525 - 16 位超低功耗微处理器,具有 USB 接口、64KB 闪存、4KB RAM、12 位 ADC、2 个 USCI、32 位 HW MPY
- ADS8365 - 4 个 1 位 10MHz 2 级 Δ-Σ 调制器的 A/D 转换器



