BQ24008 - 用于 PDA/因特网设备的单节锂离子充电器，具有集成 FET 和双色 LED

BQ24008是TI德州仪器公司的一款电池充电器IC产品，BQ24008是用于 PDA/因特网设备的单节锂离子充电器，具有集成 FET 和双色 LED，本站介绍了BQ24008的封装应用图解、特点和优点、功能等，并给出了与BQ24008相关的TI元器件型号供参考。

BQ24008 - 用于 PDA/因特网设备的单节锂离子充电器，具有集成 FET 和双色 LED - 电池充电器IC - 电池管理产品 - 德州仪器

产品描述

The bq2400x series ICs are advanced Li-Ion linear charge management devices for highly integrated and space-limited applications. They combine high-accuracy current and voltage regulation; FET pass-transistor and reverse-blocking Schottky; battery conditioning, temperature, or input-power monitoring; charge termination; charge-status indication; and charge timer in a small package.

The bq24007 and bq24008 provide the timer-enable function, allowing the host to disable the charge timer when charge current is shared with a load or when the battery is absent. This feature is ideal for applications such as cellular phones, PDAs, and internet appliances.

The bq2400x measures battery temperature using an external thermistor. For safety reasons, the bq2400x inhibits charge until the battery temperature is within the user-defined thresholds. Alternatively, the user can monitor the input voltage to qualify charge. The bq2400x series then charge the battery in three phases: preconditioning, constant current, and constant voltage. If the battery voltage is below the internal low-voltage threshold, the bq2400x uses low-current precharge to condition the battery. A preconditioning timer provides additional safety. Following pre-conditioning, the bq2400x applies a constant-charge current to the battery. An external sense-resistor sets the magnitude of the current. The constant-current phase is maintained until the battery reaches the charge-regulation voltage. The bq2400x then transitions to the constant voltage phase. The user can configure the device for cells with either coke or graphite anodes. The accuracy of the voltage regulation is better than ±1% over the operating junction temperature and supply voltage range.

Charge is terminated by maximum time or minimum taper current detection

The bq2400x automatically restarts the charge if the battery voltage falls below an internal recharge threshold.

产品特性

Highly Integrated Solution With FET Pass Transistor and Reverse-Blocking Schottky and Thermal Protection
Timer-Enable Function That Allows Host to Disable Charge Timer and Termination When Charge Current Is Shared With a Load or When Battery Is Absent
Integrated Voltage and Current Regulation With Programmable Charge Current
High-Accuracy Voltage Regulation (±1%)
Ideal for Low-Dropout Linear Charger Designs for Single-Cell Li-Ion Packs With Coke or Graphite Anodes
Up to 1.2-A Continuous Charge Current
Safety-Charge Timer During Preconditioning and Fast Charge
Integrated Cell Conditioning for Reviving Deeply Discharged Cells and Minimizing Heat Dissipation During Initial Stage of Charge
Optional Temperature or Input-Power Monitoring Before and During Charge
Various Charge-Status Output Options for Driving Single, Double, or Bicolor LEDs or Host-Processor Interface
Charge Termination by Minimum Current and Time
Low-Power Sleep Mode
Packaging: 5 mm × 5 mm MLP (bq24007)or 20-Lead TSSOP PowerPAD™
APPLICATIONS
- PDAs
- Internet Appliances
- MP3 Players
- Digital Cameras

PowerPAD is a trademark of Texas Instruments.

下面可能是您感兴趣的TI德州仪器公司电池充电器IC元器件

TI公司产品现货专家，订购TI公司产品不限最低起订量，TI芯片大陆现货即时发货，香港库存3-5天发货，海外库存7-10天发货

寻找全球TI代理商现货货源 - TI公司（德州仪器）电子元件在线订购