


- LM2676SDX-5.0 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- OPA211AIDRGTG4 - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- LM10010EVM/NOPB - 开发板,套件,编程器 > 评估板 > 评估和演示板及套件
- ISO6540FDBQR - 隔离器 > 数字隔离器
- TP3057BDW - 集成电路(IC) > 接口 > 编解码器
- TMS320C6414TBZLZ1 - 集成电路(IC) > 嵌入式 > DSP(数字信号处理器)
- TLV70330DBVR - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- SN72285N - 未分类 > 未分类
- OPA364AIDR - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- TPS2421-1DDAR - 集成电路(IC) > 电源管理(PMIC) > 热插拔控制器
- DAC7724N - 集成电路(IC) > 数据采集 > 数模转换器(DAC)
- MC3403PW - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- TPS22860DBVR - 集成电路(IC) > 电源管理(PMIC) > 配电开关,负载驱动器
- LM4819MX/NOPB - 集成电路(IC) > 线性 > 放大器 > 音频放大器
- XTR101AP - 集成电路(IC) > 接口 > 传感器和检测器接口
- LP3855EMPX-ADJ - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- SN74AHCT574NSR - 集成电路(IC) > 逻辑 > 触发器
- LMV324QPWRE4 - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- BQ3285LFSS-A1TR - 集成电路(IC) > 时钟/定时 > 实时时钟
- ADC084S101CIMM - 集成电路(IC) > 数据采集 > 模数转换器(ADC)



BQ24070 - 单片充电和系统电源路径管理 IC
BQ24070是TI德州仪器公司的一款电池充电器IC产品,BQ24070是单片充电和系统电源路径管理 IC,本站介绍了BQ24070的封装应用图解、特点和优点、功能等,并给出了与BQ24070相关的TI元器件型号供参考。
BQ24070 - 单片充电和系统电源路径管理 IC - 电池充电器IC - 电池管理产品 - 德州仪器
- Small 3.5-mm × 4.5-mm VQFN Package
- Designed for Single-Cell Li-Ion- or Li-Polymer-Based Portable Applications
- Integrated Dynamic Power-Path Management (DPPM) Feature Allowing the AC Adapter to Simultaneously Power the System and Charge the Battery
- Power Supplement Mode Allows Battery to Supplement the AC Input Current
- Autonomous Power Source Selection (AC Adapter or BAT)
- Supports Up to 2 A Total Current
- Thermal Regulation for Charge Control
- Charge Status Outputs for LED or System Interface Indicates Charge and Fault Conditions
- Reverse Current, Short-Circuit, and Thermal Protection
- Power Good Status Outputs
- 4.4-V and 6-V Options for System Output Regulation Voltage
- Smart Phones and PDAs
- MP3 Players
- Digital Cameras and Handheld Devices
- Internet Appliances
The bq24070 and bq24071 are highly integrated Li-ion linear charger and system power-path management devices targeted at space-limited portable applications. The bq2407x devices offer DC supply (AC adapter) power-path management with autonomous power-source selection, power FETs and current sensors, high-accuracy current and voltage regulation, charge status, and charge termination, in a single monolithic device.
The bq2407x devices power the system while independently charging the battery. This feature reduces the charge and discharge cycles on the battery, allows for proper charge termination, and allows the system to run with an absent or defective battery pack. This feature also allows for the system to instantaneously turn on from an external power source in the case of a deeply discharged battery pack. The IC design is focused on supplying continuous power to the system when available from the AC adapter or battery sources.
| PART NUMBER | PACKAGE | BODY SIZE (NOM) |
|---|---|---|
| bq24070 | VQFN (20) | 3.50 mm × 4.50 mm |
| bq24071 |
- SN74LV138A - 3 线路到 8 线路解码器/多路解复用器
- TL431A - 可调节精密并联稳压器
- LMT86-Q1 - 具有 AB 类输出的 LMT86-Q1 - 1.5V、SC70、多增益模拟温度传感器
- TPS40304 - 高功率密度、600kHz 3V 至 20V 宽输入同步降压控制器,600mV、1% 参考
- SN74AVC2T245 - 具有可配置电压转换和三态输出的双位 2-DIR 引脚双电源总线收发器
- UC2823A - 高速 PWM 控制器
- UCC2305-Q1 - 汽车类 HID 灯控制器
- ADC10154 - 具有 4 或 8 通道 MUX、跟踪/保持和参考功能的 10 位 + 4 微秒 ADC
- ADS1110 - 16 位 15SPS Δ-Σ ADC,具有内部参考、PGA 和振荡器 I2C 串行接口
- CD74ACT174 - 具有复位功能的六路 D 类触发器



