

- OPA360AIDCKTG4 - 集成电路(IC) > 线性 > 放大器 > 视频放大器和模块
- TPS2110PWRG4 - 集成电路(IC) > 电源管理(PMIC) > OR 控制器,理想二极管
- TPS61031PWPR - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- DS90C385AMT/NOPB - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- LM5064EVK/NOPB - 开发板,套件,编程器 > 评估板 > 评估和演示板及套件
- SN74LV244ADWR - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- TPS65132BYFFR - 集成电路(IC) > 电源管理(PMIC) > 特殊用途稳压器
- THS4121IDGNR - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- SN74AUC2G06DCKR - 集成电路(IC) > 逻辑 > 门和反相器
- SN74ABT7820-15PN - 集成电路(IC) > 逻辑 > FIFO 存储器
- LM2575HVT-5.0/ELLI859 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- ADS8365IPAGG4 - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- TPA6133A2EVM - 开发板,套件,编程器 > 评估板 > 音频放大器评估板
- ADCV08832CIMX - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- TLV70013DDCT - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- ADS1606IPAPT - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- ADS7957SRHBR - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- SN74HCS126QDRQ1 - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- DP83815DVNG/NOPB - 集成电路(IC) > 接口 > 控制器
- ADS8401EVM - 开发板,套件,编程器 > 评估板 > 模数转换器(ADC)评估板



BQ24088 - 具有热调节的 750mA 单片锂离子/锂聚合物充电管理 IC
BQ24088是TI德州仪器公司的一款电池充电器IC产品,BQ24088是具有热调节的 750mA 单片锂离子/锂聚合物充电管理 IC,本站介绍了BQ24088的封装应用图解、特点和优点、功能等,并给出了与BQ24088相关的TI元器件型号供参考。
BQ24088 - 具有热调节的 750mA 单片锂离子/锂聚合物充电管理 IC - 电池充电器IC - 电池管理产品 - 德州仪器
The bq24085/6/7/8 series are highly integrated Li-Ion and Li-Pol linear chargers, targeted at space-limited portable applications. The bq24085/6/7/8 series offers a variety of safety features and functional options, while still implementing a complete charging system in a small package. The battery is charged in three phases: conditioning, constant or thermally regulated current, and constant voltage. Charge is terminated based on minimum current. An internal programmable charge timer provides a backup safety feature for charge termination and is dynamically adjusted during the thermal regulation phase. The bq24085/6/7/8 automatically restarts the charge if the battery voltage falls below an internal threshold; sleep mode is set when the external input supply is removed. Multiple versions of this device family enable easy design of the bq24085/6/7/8 in cradle chargers or in the end equipment, while using low cost or high-end AC adapters.
- Ideal for Low-Dropout Designs for Single-Cell Li-Ion or Li-Pol Packs in Space Limited Applications
- Integrated Power FET and Current Sensor for up to 750-mA Charge Applications
- Reverse Leakage Protection Prevents Battery Drainage
- ±0.5% Voltage Regulation Accuracy
- Thermal Regulation Maximizes Charge Rate
- Charge Termination by Minimum Current and Time
- Precharge Conditioning With Safety Timer
- Status Outputs for LED or System Interface Indicate Charge, Fault, and Power Good Outputs
- Short-Circuit and Thermal Protection
- Automatic Sleep Mode for Low Power Consumption
- Small 3×3 mm MLP Package
- Selectable Battery Insertion and Battery Absent Detection
- Input Overvoltage Protection
- 6.5 V and 10.5 V Options
- APPLICATIONS
- PDA, MP3 Players, Digital Cameras
- Internet Appliances and Handheld Devices
- TL751L12 - 具有关断功能的低压降 (LDO) Pnp 小电流电压稳压器
- ADS1234 - 24 位超低噪声模数转换器
- SN75C3222 - 3V 至 5.5V 多通道 RS-232 兼容线路驱动器/接收器
- ADC128S022 - 8 通道、50 ksps 至 200 ksps、12 位 A/D 转换器
- BQ2002T - 具有 dT/dt 终端的镍镉电池/镍氢电池闸控充电管理 IC
- CD74HCT574 - 具有三态输出的高速 CMOS 逻辑八路上升沿 D 类触发器
- AM4379 - AM437x ARM Cortex-A9 微处理器 (MPU)
- SN74LV161A - 4 位同步二进制计数器
- ADS7959-Q1 - 车用 8 位、1 MSPS、8 通道、单端、SAR ADC
- TPS3610U18 - 用于 RAM 保持的电池备份监控器



