


- ADS7853EVM-PDK - 开发板,套件,编程器 > 评估板 > 模数转换器(ADC)评估板
- PT6408P - 直流转换器
- TPS63710DRRT - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- LM2902KAVQPWRCT - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- ADS7886SBDCKT - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- SN74HCS595QWBQBRQ1 - 集成电路(IC) > 逻辑 > 移位寄存器
- LME49740NABD - 开发板,套件,编程器 > 评估板 > 运算放大器评估板
- SN65LVDT2D - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- HPA02218RTERQ1 - 电源管理IC - 稳压器 - DC DC 开关稳压器
- THS3125CDRG4 - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- FDC1004QDGSRQ1 - 集成电路(IC) > 接口 > 传感器,电容式触控
- TL2575HV-33IKTTR - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- ISO7720D - 隔离器 > 数字隔离器
- COP8SAA716N9 - 集成电路(IC) > 嵌入式 > 微控制器
- LP3470M5-4.63 - 集成电路(IC) > 电源管理(PMIC) > 监控器
- OPA2227MDREP - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- LM3S2739-IBZ50-A2T - 集成电路(IC) > 嵌入式 > 微控制器
- SNJ54AHCT574W - 集成电路(IC) > 逻辑 > 触发器
- MCF8329A1IREER - 集成电路(IC) > 电源管理(PMIC) > 电机驱动器,控制器
- SNJ54ACT00FK - 集成电路(IC) > 逻辑 > 门和反相器



BQ24092 - 1A 单输入单节锂离子电池充电器,可通过 JEITA 和 10kΩ NTC 运行
BQ24092是TI德州仪器公司的一款电池充电器IC产品,BQ24092是1A 单输入单节锂离子电池充电器,可通过 JEITA 和 10kΩ NTC 运行,本站介绍了BQ24092的封装应用图解、特点和优点、功能等,并给出了与BQ24092相关的TI元器件型号供参考。
BQ24092 - 1A 单输入单节锂离子电池充电器,可通过 JEITA 和 10kΩ NTC 运行 - 电池充电器IC - 电池管理产品 - 德州仪器
- Charging
- 1% Charge Voltage Accuracy
- 10% Charge Current Accuracy
- Pin Selectable USB 100-mA and 500-mA Maximum Input Current Limit
- Programmable Termination and Precharge Threshold
- Protection
- 6.6 V Over-Voltage Protection
- Input Voltage Dynamic Power Management
- 125°C Thermal Regulation; 150°C Thermal Shutdown Protection
- OUT Short-Circuit Protection and ISET Short Detection
- Operation Over JEITA Range via Battery NTC – ½ Fast-Charge-Current at Cold, 4.06V at Hot, bq24092/3
- Fixed 10-Hour Safety Timer
- System
- Automatic Termination and Timer Disable Mode (TTDM) for Absent Battery Pack With Thermistor
- Status Indication – Charging/Done
- Available in Small 10-Pin MSOP Package
- Smart Phones
- PDAs
- MP3 Players
- Low-Power Handheld Devices
The bq2409x series of devices are highly integrated Li-ion and Li-Pol linear chargers devices targeted at space-limited portable applications. The devices operate from either a USB port or AC adapter. The high input voltage range with input overvoltage protection supports low-cost unregulated adapters.
The bq2409x has a single power output that charges the battery. A system load can be placed in parallel with the battery as long as the average system load does not keep the battery from charging fully during the 10-hour safety timer.
The battery is charged in three phases: conditioning, constant current and constant voltage. In all charge phases, an internal control loop monitors the IC junction temperature and reduces the charge current if an internal temperature threshold is exceeded.
| PART NUMBER | PACKAGE | BODY SIZE (NOM) |
|---|---|---|
| bq2409x | HVSSOP (10) | 3.00 mm x 3.00 mm |
- CSD17571Q2 - 30V N 通道 NexFET 功率 MOSFET,CSD175712Q
- SN74HC08-Q1 - 汽车类四路 2 输入正与门
- TPS3613-01 - 用于 RAM 保持的可调节电池备份监控器
- SN74LVTH16835 - 具有三态输出的 3.3V ABT 18 位通用总线驱动器
- SN74LVC1G79-EP - 增强型产品单路上升沿 D 类触发器
- TMS320F28332 - Delfino 微处理器
- BQ24030-Q1 - 汽车类单片充电和系统电源路径管理 IC (bqTINY)
- UC1832 - 精确低压降线性控制器
- SN65LBC184 - 瞬态电压抑制差动收发器
- TLV2545 - 12 位 200 kSPS ADC 系列 输出,TMS320 兼容(最高 10MHz)单通道 伪差动



