

- TL7733BIDG4 - 集成电路(IC) > 电源管理(PMIC) > 监控器
- INA190A4IDCKT - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- UC5601NG4 - 接口 - 信号端接器
- LP358D - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- TNETV2685FIBZUT7 - 嵌入式 - DSP(数字信号处理器)
- BQMTESTER - 开发板,套件,编程器 > 开发板,编程器配件
- CD4013BM96E4 - 集成电路(IC) > 逻辑 > 触发器
- COP8SAB720M8 - 集成电路(IC) > 嵌入式 > 微控制器
- ULN2004AINSG4 - 分立半导体产品 > 晶体管 > 双极(BJT) > 双极晶体管阵列
- SN74ALVC16244ADLR - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- LM306DRG4 - 线性 - 比较器
- TLV1872EVM - 开发板,套件,编程器 > 评估板 > 评估和演示板及套件
- CD74ACT74ME4 - 集成电路(IC) > 逻辑 > 触发器
- SN74LV164APWG4 - 集成电路(IC) > 逻辑 > 移位寄存器
- TLC0834IDR - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- DEM-OPA-SO-2E - 开发板,套件,编程器 > 评估板 > 运算放大器评估板
- LM9044V/NOPB - 集成电路(IC) > 接口 > 传感器和检测器接口
- TLV2472AIDR - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- TPS54429EVM-608 - 开发板,套件,编程器 > 评估板 > DC/DC 和 AC/DC(离线)SMPS 评估板
- MSP430F6776IPEU - 集成电路(IC) > 嵌入式 > 微控制器



BQ25017 - 具有集成同步降压转换器、固定输出 1.8V 的双输入充电器
BQ25017是TI德州仪器公司的一款电池充电器IC产品,BQ25017是具有集成同步降压转换器、固定输出 1.8V 的双输入充电器,本站介绍了BQ25017的封装应用图解、特点和优点、功能等,并给出了与BQ25017相关的TI元器件型号供参考。
BQ25017 - 具有集成同步降压转换器、固定输出 1.8V 的双输入充电器 - 电池充电器IC - 电池管理产品 - 德州仪器
The bq25015/7 are highly integrated charge and power management devices targeted at space-limited bluetooth applications. The bq25015/7 devices offer integrated power FET and current sensor for charge control, reverse blocking protection, high accuracy current and voltage regulation, charge status, charge termination, and a highly efficient and low-power dc-dc converter in a small package.
The bq25015/7 devices charge the battery in three phases: conditioning, constant current and constant voltage. Charge is terminated based on minimum current. An internal charge timer provides a backup safety feature for charge termination. The bq25015/7 automatically re-starts the charge if the battery voltage falls below an internal threshold. The bq25015/7 automatically enters sleep mode when VCC supply is removed.
The integrated low-power high-efficiency dc-dc converter is designed to operate directly from a single-cell Li-ion or Li-Pol battery pack. The output voltage is either adjustable from 0.7 V to VBAT, or fixed at 1.8 V (bq25017) and is capable of delivering up to 300-mA of load current. The dc-dc converter operates at a synchronized 1 MHz switching frequency allowing for the use of small inductors.
- Li-Ion Or Li-Pol ChargeManagement and Synchronous DC-DC Power Conversion In a Single Chip
- Charges and Powers the System from Either the AC Adapter or USB with Autonomous Power Source Selection
- Integrated USB Charge Control with Selectable 100 mA and 500 mA Charge Rates
- Integrated Power FET and Current Sensor for Up to 500 mA Charge Applications AND 300 mA DC-DC Controller with Integrated FETs
- Reverse Leakage Protection Prevents Battery Drainage
- Automatic Power Save Mode For High Efficiency at Low Current, or Forced PWM for Frequency Sensitive Applications
- APPLICATIONS
- MP3 Players
- PDAs, Smartphones
- Digital Cameras
- SN74AVCB164245-Q1 - 具有可配置电压转换和三态输出的汽车类 16 位双电源总线收发器
- SN74HC166 - 8 位并联负载移位寄存器
- TPS78618 - 单输出 LDO、1.5A、固定电压 (1.8V)、低噪声、高 PSRR
- UC2573 - 降压脉宽调制器步降稳压器
- TLV810S - 3 引脚电压监控器,具有高电平有效、推挽复位功能
- TS3L501E - 具有断电模式的 16 位至 8 位 多路复用器/多路解复用器千兆以太网 LAN 开关
- CD54HC374 - 具有三态输出的高速 CMOS 逻辑八路上升沿 D 类触发器
- SN65LBC170 - 三路差动收发器
- MSP430G2230 - MSP430G22x0 混合信号微处理器
- UCC283-ADJ - 单输出 LDO、3.0A、可调节电压(1.22 至 8.5V)、反向电流保护、热关断



