

- BQ27621EVM-G1 - 开发板,套件,编程器 > 评估板 > 评估和演示板及套件
- LM79M05CT/NOPB - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- TPS62233DRYR - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- LP38842S-1.2 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- LP3963ES-2.5/NOPB - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- DP83936AVUL-20 - 集成电路(IC) > 接口 > 控制器
- LM3502ITL-44EV - 开发板,套件,编程器 > 评估板 > LED 驱动器评估板
- DAC0808LCMX - 集成电路(IC) > 数据采集 > 数模转换器(DAC)
- CC2530EMK - 开发板,套件,编程器 > 评估板 > 射频评估和开发套件,板
- 100123W-MIL - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- DAC82002EVM - 开发板,套件,编程器 > 评估板 > 数模转换器(DAC)评估板
- TPS65010EVM-230 - 开发板,套件,编程器 > 评估板 > DC/DC 和 AC/DC(离线)SMPS 评估板
- SN74LVC1G58DCKRE4 - 逻辑 - 栅极和逆变器 - 多功能,可配置
- SN74LS697NSRG4 - 逻辑 - 计数器,除法器
- ADS5103IPFB - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- TLC7705QD - 集成电路(IC) > 电源管理(PMIC) > 监控器
- LM74502HQDDFRQ1 - 集成电路(IC) > 电源管理(PMIC) > OR 控制器,理想二极管
- CDC421100RGER - 集成电路(IC) > 时钟/定时 > 时钟发生器,PLL,频率合成器
- TPS62042DRCRG4 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- DAC7513N/3K - 集成电路(IC) > 数据采集 > 数模转换器(DAC)



BQ25060 - 具有 50mA LDO 的 1A 单输入单节锂离子电池充电器
BQ25060是TI德州仪器公司的一款电池充电器IC产品,BQ25060是具有 50mA LDO 的 1A 单输入单节锂离子电池充电器,本站介绍了BQ25060的封装应用图解、特点和优点、功能等,并给出了与BQ25060相关的TI元器件型号供参考。
BQ25060 - 具有 50mA LDO 的 1A 单输入单节锂离子电池充电器 - 电池充电器IC - 电池管理产品 - 德州仪器
The bq25060 is a highly integrated Li-Ion linear battery charger targeted at space-limited portable applications. It operates from either a USB port or AC Adapter and charges a single-cell Li-Ion battery with up to 1A of charge current. The 30V input voltage range with input over-voltage protections supports low-cost unregulated adapters.
The bq25060 has a single power output that charges the battery. The system load is connected to OUT. The low-battery system startup circuitry maintains OUT greater than 3.4V whenever an input source is connected. This allows the system to start-up and run whenever an input source is connected regardless of the battery voltage. The charge current is programmable up to 1A using the ISET input. Additionally, a 4.9V 50mA LDO is integrated into the IC for supplying low power external circuitry.
The battery is charged in three phases: conditioning, constant current and constant voltage. In all charge phases, an internal control loop monitors the IC junction temperature and reduces the charge current if an internal temperature threshold is exceeded. The charger power stage and charge current sense functions are fully integrated. The charger function has high accuracy current and voltage regulation loops, charge status display, and charge termination.
- 30V input Rating, With 10.5V Over-Voltage Protection (OVP)
- FET Controller for External Battery FET for External Power Path Control (BGATE)
- Input Voltage Dynamic Power Management
- 50mA integrated Low Dropout Linear Regulator (LDO)
- Programmable Charge Current Through ISET and EN Pin
- 0.5% Battery Voltage Regulation Accuracy
- 7% Charge Current Regulation Accuracy
- Thermal Regulation and Protection
- Battery NTC Monitoring During Charge
- Status Indication – Charging/Done
- Available in small 2mm × 3mm 10 Pin SON Package
- APPLICATIONS
- Smart Phones
- Mobile Phones
- Portable Media Players
- Low Power Handheld Devices
- SN74ABT823 - 具有三态输出的 9 位总线接口触发器
- SN54AHCT123A - 双路可重触发单稳多频振荡器
- TLK2201AJR - 1.0 至 1.6Gbps 千兆以太网收发器
- TPS54286 - 2A DUAL NON-SYNCHRONOUS CONVERTER
- UC3524A - 高级稳压脉宽调制器
- LP5522 - 可编程 LED 驱动器
- ADS6243 - 具有串行 LVDS 输出的四路 14 位 80MSPS ADC
- CD4510B - CMOS 可预设置的 BCD 加/减计数器
- TPS76725-EP - 增强型产品快速瞬态响应 1A 低压降稳压器
- SN75LVDS051 - 高速差动线路驱动器和接收器



