CC1150 - 针对低功耗无线应用设计的高度集成多通道射频发送器

CC1150是TI德州仪器公司的一款TI芯片产品，CC1150是针对低功耗无线应用设计的高度集成多通道射频发送器，本站介绍了CC1150的封装应用图解、特点和优点、功能等，并给出了与CC1150相关的TI元器件型号供参考。

CC1150 - 针对低功耗无线应用设计的高度集成多通道射频发送器 - TI芯片 - 低于1GHz - 德州仪器

1 Device Overview

1.1 Features

Small Size
- QLP 4-mm × 4-mm Package, 16 Pins
True Single Chip UHF RF Transmitter
Frequency Bands
- 300 to 348 MHz
- 400 to 464 MHz
- 800 to 928 MHz
Programmable Data Rate Up to 500 kBaud
Low Current Consumption
Programmable Output Power Up to +10 dBm for All Supported Frequencies
Programmable Baseband Modulator
Ideal For Multi-channel Operation
Very Few External Components
- Completely On-chip Frequency Synthesizer
- No External Filters Needed
Configurable Packet Handling Hardware
Suitable for Frequency Hopping Systems Due to a Fast Settling Frequency Synthesizer
Optional Forward Error Correction with Interleaving
64-byte TX Data FIFO
Suited for Systems Compliant with EN 300 220 and FCC CFR Part 15
Many Powerful Digital Features Allow a High-performance RF system to be made Using an Inexpensive Microcontroller
Efficient SPI interface: All Registers Can be Programmed With One "Burst" Transfer
Integrated Analog Temperature Sensor
Lead-free “Green” Package
Flexible Support for Packet Oriented Systems
- On-chip Support for Sync-Word Insertion, Flexible Packet Length and Automatic CRC Handling
OOK and Flexible ASK Shaping Supported
2-FSK, GFSK and MSK Supported
Optional Automatic Whitening of Data
Support for Asynchronous Transparent Transmit Mode for Backwards Compatibility with Existing Radio Communication Protocols

1.2 Applications

Ultra-low Power UHF Wireless Transmitters
Operating in the 315-, 433-, 868-, and 915-MHz ISM/SRD bands
AMR – Automatic Meter Reading
Consumer Electronics
RKE – Remote Keyless Entry
Low Power Telemetry
Home and Building Automation
Wireless Alarm and Security Systems
Industrial Monitoring and Control
Wireless Sensor Networks

1.3 Description

The CC1150 is a true single-chip UHF transmitter designed for very low power wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 315-, 433-, 868-, and 915-MHz, but can easily be programmed for operation at other frequencies in the 300 to 348 MHz, 400 to 464 MHz and 800 to 928 MHz bands.

The RF transmitter is integrated with a highly configurable baseband modulator. The modulator supports various modulation formats and has a configurable data rate up to 500 kBaud. The CC1150 device provides extensive hardware support for packet handling, data buffering and burst transmissions.

The main operating parameters and the 64-byte transmit FIFO of CC1150 can be controlled via an SPI interface. In a typical system, the CC1150 device will be used together with a microcontroller and a few additional passive components.

CC1150 is part of the SmartRF™ technology platform based on 0.18-μm CMOS technology from Texas Instruments.

Table 1-1 Device Information(1)

PART NUMBER	PACKAGE	BODY SIZE
CC1150	VQFNP (16)	4.00 mm × 4.00 mm

下面可能是您感兴趣的TI德州仪器公司TI芯片元器件

TI公司产品现货专家，订购TI公司产品不限最低起订量，TI芯片大陆现货即时发货，香港库存3-5天发货，海外库存7-10天发货

寻找全球TI代理商现货货源 - TI公司（德州仪器）电子元件在线订购