The CC2510Fx/CC2511Fx is a true low-cost 2.4 GHz system-on-chip (SoC) designed for lowpower wireless applications. The CC2510Fx/CC2511Fx combines the excellent performance of the state-of-the-art RF transceiver CC2500 with an industry-standard enhanced 8051 MCU, up to 32 kB of in-system programmable flash memory and 4 kB of RAM, and many other powerful features. The small 6x6 mm package makes it very suited for applications with size limitations.

The CC2510Fx/CC2511Fx is highly suited for systems where very low power consumption is required. This is ensured by several advanced low-power operating modes. The CC2511Fx adds a full-speed USB controller to the feature set of the CC2510Fx. Interfacing to a PC using the USB interface is quick and easy, and the high data rate (12 Mbps) of the USB interface avoids the bottlenecks of RS-232 or low-speed USB interfaces.

• Radio
  • High-performance RF transceiver based on the market-leading CC2500
  • Excellent receiver selectivity and blocking performance
  • High sensitivity (−103 dBm at 2.4 kBaud)
  • Programmable data rate up to 500 kBaud
  • Programmable output power up to 1 dBm for all supported frequencies
  • Frequency range: 2400 - 2483.5 MHz
  • Digital RSSI / LQI support
• Current Consumption
  • Low current consumption (RX: 17.1 mA @ 2.4 kBaud, TX: 16 mA @ −6 dBm output power)
  • 0.3 µA in PM3 (the operating mode with the lowest power consumption)
• MCU, Memory, and Peripherals
  • High performance and low power 8051 microcontroller core.
  • 8/16/32 kB in-system programmable flash, and 1/2/4 kB RAM
  • Full-Speed USB Controller with 1 kB USB FIFO (CC2511Fx)
  • I2S interface
  • 7 – 12 bit ADC with up to eight inputs
  • 128-bit AES security coprocessor
  • Powerful DMA functionality
  • Two USARTs
  • 16-bit timer with DSM mode
  • Three 8-bit timers
  • Hardware debug support
  • 21 (CC2510Fx ) or 19 (CC2511Fx ) GPIO pins
• General
  • Wide supply voltage range (2.0V - 3.6V)
  • Green package: RoHS compliant and no antimony or bromine, 6×6mm QFN 36