

- LM2687MM - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- CD74HCT4040MT - 集成电路(IC) > 逻辑 > 计数器,除法器
- MAX3222EIDBR - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- ADC1175CIMTCX - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- LM2931AZ-5.0/LFT3 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- CD74AC646M96 - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- TMCS1126B2BQDVGRQ1 - 传感器,变送器 > 电流传感器
- CY74FCT821BTSOCE4 - 集成电路(IC) > 逻辑 > 触发器
- LMX2485E EVAL/NOPB - 开发板,套件,编程器 > 评估板 > 射频评估和开发套件,板
- ISO1541D - 隔离器 > 数字隔离器
- TP13054ADW - 集成电路(IC) > 接口 > 编解码器
- SN74LV08APWR - 集成电路(IC) > 逻辑 > 门和反相器
- TLV9301IDBVR - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- TLV70036DSER - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- ISO7710FQDWRQ1 - 隔离器 > 数字隔离器
- TLV2472IDRG4 - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- TPS79425DCQR - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- ISO7240CFQDWRQ1 - 隔离器 > 数字隔离器
- DAC101C081CIMKX/NOPB - 集成电路(IC) > 数据采集 > 数模转换器(DAC)
- INA296B4IDGKR - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器



CD54HC4538 - 高速 CMOS 逻辑双路可重触发的精密单稳多谐振荡器
CD54HC4538是TI德州仪器公司的一款单稳多频振荡器产品,CD54HC4538是高速 CMOS 逻辑双路可重触发的精密单稳多谐振荡器,本站介绍了CD54HC4538的封装应用图解、特点和优点、功能等,并给出了与CD54HC4538相关的TI元器件型号供参考。
CD54HC4538 - 高速 CMOS 逻辑双路可重触发的精密单稳多谐振荡器 - 单稳多频振荡器 - 特殊逻辑 - 德州仪器
The HC4538 and HCT4538 are dual retriggerable/resettable monostable precision multivibrators for fixed voltage timing applications. An external resistor (RX) and an external capacitor (CX) control the timing and the accuracy for the circuit. Adjustment of RX and CX provides a wide range of output pulse widths from the Q and Q\ terminals. The propagation delay from trigger input-to-output transition and the propagation delay from reset input-to-output transition are independent of RX and CX.
Leading-edge triggering (A) and trailing edge triggering (B)\ inputs are provided for triggering from either edge of the input pulse. An unused "A" input should be tied to GND and an unused B\ should be tied to VCC. On power up the IC is reset. Unused resets and sections must be terminated. In normal operation the circuit retriggers on the application of each new trigger pulse. To operate in the non-triggerable mode Q\ is connected to B\ when leading edge triggering (A) is used or Q is connected to A when trailing edge triggering (B)\ is used. The period (. CMIN is 0pF.
- Retriggerable/Resettable Capability
- Trigger and Reset Propagation Delays Independent of RX, CX
- Triggering from the Leading or Trailing Edge
- Q and Q\ Buffered Outputs Available
- Separate Resets
- Wide Range of Output Pulse Widths
- Schmitt Trigger Input on A and B\ Inputs
- Retrigger Time is Independent of CX
- Fanout (Over Temperature Range)
- Standard Outputs . . . . . . . . . . . . . . . 10 LSTTL Loads
- Bus Driver Outputs . . . . . . . . . . . . . 15 LSTTL Loads
- Wide Operating Temperature Range . . . 55°C to 125°C
- Balanced Propagation Delay and Transition Times
- Significant Power Reduction Compared to LSTTL Logic ICs
- HC Types
- 2V to 6V Operation
- High Noise Immunity: NIL = 30%, NIH = 30% of VCC at VCC = 5V
- HCT Types
- 4.5V to 5.5V Operation
- Direct LSTTL Input Logic Compatibility, VIL = 0.8V (Max), VIH = 2V (Min)
- CMOS Input Compatibility, Il 1µA at VOL, VOH
- SN74AHC1G08-Q1 - 汽车类单路 2 输入正与门
- CDC318A - 具有 I2C 控制接口的 1 线路到 18 线路时钟驱动器
- UCC27425-Q1 - 具有使能端的汽车类双路 4A MOSFET 驱动器
- SN54ALS38B - 具有集电极开路输出的四路 2 输入正与非缓冲器
- CD74HCT4020 - 高速 CMOS 逻辑 14 级二进制计数器
- SN54LS139A - 双路 2 线路至 4 线路解码器/多路解复用器
- LM2753 - 高功率开关电容器电压转换器/闪存 LED 驱动器
- UC2872 - 谐振灯镇流器控制器
- LM3525 - 单端口 USB 电源开关和过流保护
- REF3140 - 采用 SOT23-3 封装最大漂移 20ppm/℃ 静态电流 100uA 的电压参考系列



