

- INA185A4IDCKR - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- 4511BDC - 集成电路(IC) > 电源管理(PMIC) > 显示驱动器
- SN74LVC2G125DCUT - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- TLV3701QDBVRG4Q1 - 集成电路(IC) > 线性 > 比较器
- MSP430FR6922IRGCR - 集成电路(IC) > 嵌入式 > 微控制器
- LM4871M - 集成电路(IC) > 线性 > 放大器 > 音频放大器
- TPS3898ADRYT - 集成电路(IC) > 电源管理(PMIC) > 监控器
- TPS7348QDR - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- TPA2005D1DGNRQ1 - 集成电路(IC) > 线性 > 放大器 > 音频放大器
- THS8134BCPHP - 集成电路(IC) > 数据采集 > ADC/DAC - 特殊用途
- SN74AVCH2T45DCTR - 集成电路(IC) > 逻辑 > 转换器,电平移位器
- TRSF3232CDRG4 - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- SN74HC245PW - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- SN74ALVCH16245DL - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- TPS715A33DRBT - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- TDP2004IRNQT - 集成电路(IC) > 接口 > 信号缓冲器、中继器、分离器
- TLV27L2CDGK - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- CD4069UBEG4 - 集成电路(IC) > 逻辑 > 门和反相器
- CLC5802IM - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- TMP121AQDBVREP - 传感器,变送器 > 温度传感器 > 模拟和数字输出



DS125MB203 - 12.5Gbps 双端口 MUX 和扇出缓冲器
DS125MB203是TI德州仪器公司的一款复用缓冲器产品,DS125MB203是12.5Gbps 双端口 MUX 和扇出缓冲器,本站介绍了DS125MB203的封装应用图解、特点和优点、功能等,并给出了与DS125MB203相关的TI元器件型号供参考。
DS125MB203 - 12.5Gbps 双端口 MUX 和扇出缓冲器 - 复用缓冲器 - 信号调节器 - 德州仪器
The DS125MB203 is an extremely low-power high-performance dual-port 2:1 mux and 1:2 switch/fanout designed to support high-availability systems using PCIe Gen-3/2/1, 10G-KR, and other high-speed interface serial protocols up to 12.5 Gbps. The integrated signal conditioning function eliminates the need for external devices, reducing BOM cost and board space. The receiver's continuous time linear equalizer (CTLE) provides a boost of up to +30 dB at 6.25 GHz (12.5 Gbps) and is capable of opening an input eye that is completely closed due to inter symbol interference (ISI) induced by interconnect medium such as 30in+ backplane traces or 8m+ copper cables. The transmitter provides a de-emphasis boost of up to -12 dB and output voltage amplitude control from 700 mV to 1300 mV.
When operating in 10G-KR and PCIe Gen-3 mode, the DS125MB203 transparently allows the host controller and the end point to optimize the full link and negotiate transmit equalizer coefficients. This seamless management of the link training protocol ensures system level interoperability with minimum latency. With a low power consumption of 390 mW (typ) total or 195 mW/port (bidirectional) and option to turn off unused ports, the DS125MB203 enables energy-efficient system design. A single supply of 3.3V or 2.5V is required to power the device.
The programmable settings can be applied via pin settings, SMBus (I2C) protocol or an external EEPROM. When operating in the EEPROM mode, the configuration information is automatically loaded on power up. This eliminates the need for an external microprocessor or software driver.
- Comprehensive Family, Proven System Interoperability
- DS125BR111: One-Lane Repeater
- DS125BR210: Two-Channel Repeater
- DS125BR401: Four-Lane Repeater
- DS125BR800: Eight-Channel Repeater
- DS125MB203: Two-Port, 2:1/1:2 Mux
- DS125DF410: Four-Channel Retimer With CDR
- Low 65-mW/Channel (Typical) Power Consumption, With Option to Power Down Unused Channels
- Transparent Management of Link Training Protocol for PCIe and 10G-KR
- Advanced Signal Conditioning Features
- Receive Equalization up to 30dB at 6.25 GHz
- Transmit De-emphasis up to -12dB
- Transmit Output Voltage Control: 700 mV to 1300 mV
- Programmable via Pin Selection, EEPROM, or SMBus Interface
- Single Supply Voltage: 2.5V or 3.3V (selectable)
- 40°C to 85°C Operating Temperature Range
- 3-kV HBM ESD Rating
- Flow-Thru Pinout in 10mmx5.5mm 54-Pin Leadless QFN Package
- TPS65835 - 面向主动快门 3D 眼镜的高级电源管理 IC (PMIC),具有集成 MSP430
- SN65LBC172 - 四路低功耗差动线路驱动器
- BQ294502 - 用于 2 至 3 节锂离子电池的过压保护器件,具有 4.35v OVP
- LM5027A - 电压模式有源钳位控制器
- CDCR83A - Direct Rambus(TM) 时钟发生器
- CD74HCT283 - 具有快速进位的高速 CMOS 逻辑 4 位二进制全加器
- TCA8418E - 具有集成 ESD 保护的 I2C 控制键盘扫描 IC
- NS16C2552 - 具有 16 字节 FIFO 和高达 5 Mbit/s 数据速率的双路 UART
- SN54AC32 - 四路 2 输入正或门
- CSD19506KCS - 80V、N 通道 NexFET(TM) 功率 MOSFET,CSD19506KCS



