DS25BR400是TI公司的一款转接驱动器/中继器产品，DS25BR400是具有发送去加重功能和接收均衡的四路 2.5 Gbps CML 收发器，本页介绍了DS25BR400的产品说明、应用、特性等，并给出了与DS25BR400相关的TI元器件型号供参考。
DS25BR400 - 具有发送去加重功能和接收均衡的四路 2.5 Gbps CML 收发器 - 转接驱动器/中继器 - 信号调节器 - TI公司（Texas Instruments，德州仪器）
The DS25BR400 is a quad 250 Mbps – 2.5 Gbps CML transceiver, or 8-channel buffer, for use in backplane and cable applications. With operation down to 250 Mbps, the DS25BR400 can be used in applications requiring both low and high frequency data rates. Each input stage has a fixed equalizer to reduce ISI distortion from board traces. The equalizers are enabled through two control pins. These control pins provide flexibility in applications where ISI distortion may vary from one direction to another. All output drivers have four selectable steps of de-emphasis to compensate for transmission loss. The de-emphasis blocks are also grouped in fours. In addition, the DS25BR400 also has loopback control capability on four channels. All the CML drivers have 50? termination to VCC. All receivers are internally terminated with differential 100?.
- 250 Mbps – 2.5 Gbps Low Jitter Operation
- Optional Fixed Input Equalization
- Selectable Output De-Emphasis
- Individual Loopback Controls
- On-Chip Termination
- +3.3V Supply
- Lead-Less WQFN-60 Pin Package
- (9 mm x9 mm x0.8 mm, 0.5 mm Pitch)
- −40°C to +85°C Industrial Temperature Range
- 6 kV ESD Rating, HBM
