• Wide Input Voltage Range: 4.5 V to 42 V
• Internally Compensated Voltage Mode Control
• Stable With Low ESR Ceramic Capacitors
• 100-mΩ N-Channel MOSFET
• Output Voltage Options: -ADJ (Outputs as Low as 1.285 V) -5.0 (Output Fixed to 5 V)
• ±1.5% Feedback Reference Accuracy
• Switching Frequency of 500 kHz
• –40°C to 125°C Operating Junction Temperature Range
• Precision Enable Pin
• Integrated Boot-Strap Diode
• Integrated Soft-Start
• Fully WEBENCH® Enabled
• LM22678-Q1 is an Automotive-Grade Product that is AEC-Q100 Grade 1 Qualified (–40°C to +125°C Operating Junction Temperature)
• PFM (Exposed Pad) Package

• Industrial Control
• Telecom and Datacom Systems
• Embedded Systems
• Conversions from Standard 24-V, 12-V and 5-V Input Rails

The LM22678 switching regulator provides all of the functions necessary to implement an efficient high-voltage step-down (buck) regulator using a minimum of external components. This easy-to-use regulator incorporates a 42-V N-channel MOSFET switch that can provide up to 5 A of load current. Excellent line and load regulation along with high efficiency (> 90%) are featured. Voltage mode control offers short minimum on-time, allowing the widest ratio between input and output voltages. Internal loop compensation means that the user is free from the tedious task of calculating the loop compensation components. Fixed 5-V output and adjustable output voltage options are available. A switching frequency of 500 kHz allows for small external components and good transient response. A precision enable input allows simplification of regulator control and system power sequencing. In shutdown mode the regulator draws only 25 µA (typical). Built-in soft-start (500 µs, typical) saves external components. The LM22678 device also has built-in thermal shutdown, and current limiting to protect against accidental overloads.

The LM22678 device is a member of Texas Instruments' SIMPLE SWITCHER® family. The SIMPLE SWITCHER concept provides for an easy-to-use complete design using a minimum number of external components and the TI WEBENCH design tool. TI's WEBENCH tool includes features such as external component calculation, electrical simulation, thermal simulation, and Build-It boards for easy design-in.

• ADS1282-HT - 用于地震监测和能源开发的具有 PGA 的高温超高分辨率 Δ-Σ ADC
• UC2854B-EP - 增强型产品高级高功率因数前置稳压器
• TPD4EUSB30 - 用于超高速 (6 GBPS) USB 3.0 接口的 4 通道 ESD 解决方案
• MSP430F6459 - MSP430F563xA 混合信号微控制器
• ADS62P48 - 具有 DDR LVDS 和并行 CMOS 输出的双通道 14 位、210MSPS ADC
• TMS320F28375S - TMS320F2837xS 单核 Delfino 微控制器
• DS90CR215 - +3.3V 上升沿数据选通 LVDS 21 位 频道链接 - 66 MHz
• SN74HC139 - 双路 2 线路至 4 线路解码器/多路解复用器
• UCC1805 - 低功耗 BiCMOS 电流模式 PWM
• 66AK2H06 - 多核 ARM+DSP 通信基础设施片上系统 (SOC)