LM3658 - 用于便携式应用的双源 USB/AC 锂化学充电器 IC

LM3658是TI德州仪器公司的一款电池充电器IC产品，LM3658是用于便携式应用的双源 USB/AC 锂化学充电器 IC，本站介绍了LM3658的封装应用图解、特点和优点、功能等，并给出了与LM3658相关的TI元器件型号供参考。

LM3658 - 用于便携式应用的双源 USB/AC 锂化学充电器 IC - 电池充电器IC - 电池管理产品 - 德州仪器

产品描述

The LM3658 is a single chip charger IC designed for handheld applications. It can safely charge and maintain a single cell Li-Ion/Polymer battery operating from an AC wall adapter or USB power source. Input power source selection of USB/AC is automatic. With both power sources present, the AC power source has priority. Charge current is programmed through an external resistor when operating from an AC wall adapter allowing charge currents from 50 mA to 1000 mA. When the battery is charged using USB power, charge currents of 100 mA or 500 mA are pin-selectable. The termination voltage is controlled to within ±0.35% of 4.2V.

The LM3658 requires few external components and integrates internal power FETs, reverse current protection and current sensing. The internal power FETs are thermally regulated to obtain the most efficient charging rate for a given ambient temperature.

The LM3658 operates in five modes: pre-qualification mode, constant-current mode, constant-voltage mode, top-off mode and maintenance mode. Additionally, the charger IC operates as a linear regulator in “LDO mode”, when the AC wall adapter is connected and no battery is present. Optimal battery management is obtained through thermal regulation, battery temperature measurement and multiple safety timers. The LM3658 provides two open-drain outputs for LED status indication or connection to GPIOs.

产品特性

Integrated power FETs with thermal regulation

Charges from either an AC wall adapter or USB power source with automatic source selection

50 mA to 1000 mA charge currents using AC wall adapter

Pin-selectable USB charge currents of 100 mA or 500 mA

LDO mode with 1A of source current is automatically invoked when the battery is absent and the AC wall adapter is connected

Continuous battery temperature monitoring

Built-in multiple safety timers

Charge status indication

Continuous over-current and temperature protection

Near-depleted battery pre-conditioning

Sleep mode with ultra low quiescent current

On-board Kelvin-sensing achieves ±0.35% termination accuracy

Maintenance mode with automatic recharge

Thermally enhanced 3 mm x 3 mm LLP package

下面可能是您感兴趣的TI德州仪器公司电池充电器IC元器件

TI公司产品现货专家，订购TI公司产品不限最低起订量，TI芯片大陆现货即时发货，香港库存3-5天发货，海外库存7-10天发货

寻找全球TI代理商现货货源 - TI公司（德州仪器）电子元件在线订购