LM48310 - 具有 E2S 的超低 EMI、免滤波、2.6W、单声道、D 类音频功率放大器

LM48310是TI德州仪器公司的一款扬声器放大器（AB类/D类）产品，LM48310是具有 E2S 的超低 EMI、免滤波、2.6W、单声道、D 类音频功率放大器，本站介绍了LM48310的封装应用图解、特点和优点、功能等，并给出了与LM48310相关的TI元器件型号供参考。

LM48310 - 具有 E2S 的超低 EMI、免滤波、2.6W、单声道、D 类音频功率放大器 - 扬声器放大器（AB类/D类） - 低功耗放大器 - 德州仪器

产品描述

The LM48310 is a single supply, high efficiency, mono, 2.6W, filterless switching audio amplifier. The LM48310 features TI’s Enhanced Emissions Suppression (E2S) system, that features a unique patent-pending ultra low EMI, spread spectrum, PWM architecture, that significantly reduces RF emissions while preserving audio quality and efficiency. The E2S system improves battery life, reduces external component count, board area consumption, system cost, and simplifying design.

The LM48310 is designed to meet the demands of portable multimedia devices. Operating from a single 5V supply, the device is capable of delivering 2.6W of continuous output power to a 4? load with less than 10% THD+N. Flexible power supply requirements allow operation from 2.4V to 5.5V. The LM48310 offers two logic selectable modulation schemes, fixed frequency mode, and an EMI suppressing spread spectrum mode. The E2S system includes an advanced, patent-pending edge rate control (ERC) architecture that further reduce emissions by minimizing the high frequency component of the device output, while maintaining high quality audio reproduction (THD+N = 0.03%) and high efficiency (η = 88%). The LM48310 also features a SYNC_IN input and SYNC_OUT, which allows multiple devices to operate with the same switching frequency, eliminating beat frequencies and any other interference caused by clock intermodulation.

The LM48310 features high efficiency compared to conventional Class AB amplifiers, and other low EMI Class D amplifiers. When driving and 8? speaker from a 5V supply, the device operates with 88% efficiency at PO = 1W. The gain of the LM48310 is internally set to 12dB, further reducing external component count. A low power shutdown mode reduces supply current consumption to 0.01μA.

Advanced output short circuit protection with auto-recovery prevents the device from being damaged during fault conditions. Superior click and pop suppression eliminates audible transients on power-up/down and during shutdown.

产品特性

Passes FCC Class B Radiated Emissions with 20 inches of cable
E2S System Reduces EMI while Preserving Audio Quality and Efficiency
Output Short Circuit Protection with Auto-Recovery
Stereo Class D Operation
No Output Filter Required
Internally Configured Gain (12dB)
Synchronizable Oscillator for Multi-Channel Operation
Low Power Shutdown Mode
Minimum External Components
"Click and Pop" Suppression
Micro-Power Shutdown
Available in Space-Saving WSON Package

Key Specifications

Efficiency at 3.6V, 400mW into 8? 85% (typ)
Efficiency at 5V, 1W into 8? 88% (typ)
Quiescent Power Supply Current at 5V 3.2mA
Power Output at VDD = 5V, RL = 4?, THD+N ≤ 10% 2.6W (typ)
Power Output at VDD = 5V, RL = 8?, THD+N ≤ 10% 1.6W (typ)
Shutdown Current 0.01μA (typ)

下面可能是您感兴趣的TI德州仪器公司扬声器放大器（AB类/D类）元器件

TI公司产品现货专家，订购TI公司产品不限最低起订量，TI芯片大陆现货即时发货，香港库存3-5天发货，海外库存7-10天发货

寻找全球TI代理商现货货源 - TI公司（德州仪器）电子元件在线订购