

- SN74AS841ADWR - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- BQ27520YZFR-G4 - 集成电路(IC) > 电源管理(PMIC) > 电池管理
- CDCM6208V1EVM - 开发板,套件,编程器 > 评估板 > 评估和演示板及套件
- SN74BCT2414N - 集成电路(IC) > 逻辑 > 专用逻辑器件
- TPS73401DRVEVM-527 - 开发板,套件,编程器 > 评估板 > 线性稳压器评估板
- SN74ALS323NSRE4 - 逻辑 - 移位寄存器
- OPA347PAG4 - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- SN65HVD1782DRG4 - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- 74LVC1G240DCKTG4 - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- TLE2141CD - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- SN74AC563PWLE - 集成电路(IC) > 逻辑 > 锁存器
- UCC3813D-2 - 集成电路(IC) > 电源管理(PMIC) > AC DC 转换器,离线开关
- THS4500CDGNG4 - 线性器件 - 放大器 - 仪器、运算放大器、缓冲放大器
- INA283AIDR - 集成电路(IC) > 电源管理(PMIC) > 电流调节/管理
- LM4040D41IDBZTG4 - 集成电路(IC) > 电源管理(PMIC) > 电压基准
- DP83TC817SRHARQ1 - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- ISO1176TDW - 隔离器 > 数字隔离器
- CY29FCT520CTSOCTG4 - 逻辑 - 移位寄存器
- TMDSRM48HDK - 开发板,套件,编程器 > 评估板 > 嵌入式 MCU、DSP 评估板
- F2800157EPHPQ1 - 集成电路(IC) > 嵌入式 > 微控制器



LM8333 - 移动 I/O 配套支持 Key-Scan、I/O 扩展、PWM 和 ACCESS.bus 主机接口
LM8333是TI德州仪器公司的一款I2C特殊功能产品,LM8333是移动 I/O 配套支持 Key-Scan、I/O 扩展、PWM 和 ACCESS.bus 主机接口,本站介绍了LM8333的封装应用图解、特点和优点、功能等,并给出了与LM8333相关的TI元器件型号供参考。
LM8333 - 移动 I/O 配套支持 Key-Scan、I/O 扩展、PWM 和 ACCESS.bus 主机接口 - I2C特殊功能 - I2C - 德州仪器
The LM8333 Mobile I/O Companion offloads the burden of keyboard scanning from the host, while providing extremely low power consumption in both operational and standby modes. It supports keypad matrices up to 8 × 8 in size (plus another 8 special-function keys), for portable applications such as cellphones, PDAs, games, and other handheld applications.
Key press and release events are encoded into a byte format and loaded into a FIFO buffer for retrieval by the host processor. An interrupt output (IRQ) is used to signal events such as keypad activity, a state change on either of two interrupt-capable general-purpose I/O pins, or an error condition. Interrupt and error codes are available to the host by reading dedicated registers.
Four general-purpose I/O pins are available, two of which have interrupt capability. A pulse-width modulated output based on a host-programmable internal timer is also available, which can be used as a general-purpose output if the PWM function is not required.
To minimize power, the LM8333 automatically enters a low-power standby mode when there is no keypad, I/O, or host activity.
The device is packaged in a 32–pin WQFN and a 49-pin csBGA. Both are chip-scale packages.
- 8 × 8 Standard Keys
- 8 Special Function Keys (SF Keys) Providing a Total of 72 Keys for the Maximum Keyboard Matrix
- ACCESS.Bus (I2C-compatible) Communication Interface to the Host
- Four General Purpose Host Programmable I/O Pins with Two Optional (Slow) External Interrupts
- 15-byte FIFO Buffer to Store Key Pressed and Key Released Events
- Error Control with Error Reports on (FIFO Overrun, Keypad Overrun, Invalid Command)
- Host Programmable PWM
- Host Programmable Active Time and Debounce Time
- ADS1254 - 24 位 20kHz 低功耗模数转换器
- SN65HVD230M-EP - 具有待机模式的增强型产品 3.3V Can 收发器
- CD74ACT299 - 具有常见的并行 I/O 引脚和异步复位的 8 输入通用移位/存储寄存器
- ADC14DC080 - 具有 CMOS 输出的双路 14 位、80 MSPS A/D 转换器
- TPS62410 - 具有 1 线接口、采用 QFN 封装的 2.25MHZ 2x800mA 双路降压转换器
- TAS5421-Q1 - 具有诊断功能的 20 W 单路汽车数字放大器
- DRV8301 - 具有双路电流感应放大器和降压转换器的三相无刷电机前 置驱动器(具有 SPI 的 PWM 控制器)
- DS90C365A - +3.3V 可编程 LVDS 发送器 18 位平板显示链接 - 87.5 MHz
- TM4C1233D5PM - Tiva C Series Microcontroller
- PTH05060W - 10A 输出 5V 输入的非隔离宽调节模块



