


- SN74LVC157ADG4 - 集成电路(IC) > 逻辑 > 信号开关,多路复用器,解码器
- TMS320F28035PAGQ - 集成电路(IC) > 嵌入式 > 微控制器
- SN74HC14ANSR - 集成电路(IC) > 逻辑 > 门和反相器
- TPS2541RTET - 集成电路(IC) > 电源管理(PMIC) > 配电开关,负载驱动器
- TLC5945RHBR - 集成电路(IC) > 电源管理(PMIC) > LED 驱动器
- TPS61029QDRCRQ1 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- LM2853MHX-1.2/NOPB - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- DAC5686EVM - 开发板,套件,编程器 > 评估板 > 数模转换器(DAC)评估板
- OPA695IDGKR - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- LP2985AITP-2.9/NOPB - 电源管理IC - 稳压器 - 线性
- DS125DF1610FBE/NOPB - 集成电路(IC) > 接口 > 专用
- INA207AIDGST - 集成电路(IC) > 电源管理(PMIC) > 电流调节/管理
- CY29FCT818CTSOCG4 - 逻辑 - 移位寄存器
- SN75LVDS86ADGGG4 - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- LM5045SQX/NOPB - 集成电路(IC) > 电源管理(PMIC) > AC DC 转换器,离线开关
- PT6202A - 板安装电源 > 直流转换器
- AM6441BSFFHAALV - 集成电路(IC) > 嵌入式 > 微处理器
- LMX25412060EVAL/NOPB - 开发板,套件,编程器 > 评估板 > 评估和演示板及套件
- PGA2311UG4 - 集成电路(IC) > 音频专用
- TIOS1023LYAHR - 集成电路(IC) > 接口 > 传感器和检测器接口



LMP8645 - 42V、可配置增益、低侧/高侧、高速、电压输出电流感测放大器
LMP8645是TI德州仪器公司的一款电流分流模拟输出产品,LMP8645是42V、可配置增益、低侧/高侧、高速、电压输出电流感测放大器,本站介绍了LMP8645的封装应用图解、特点和优点、功能等,并给出了与LMP8645相关的TI元器件型号供参考。
LMP8645 - 42V、可配置增益、低侧/高侧、高速、电压输出电流感测放大器 - 电流分流模拟输出 - 电流感应放大器 - 德州仪器
- Typical Values, TA = 25°C
- High Common-Mode Voltage Range
- LMP8645 –2 V to 42 V
- LMP8645HV –2 V to 76 V
- Supply Voltage Range 2.7 V to 12 V
- Gain Configurable With a Single Resistor
- Maximum Variable Gain Accuracy (With External Resistor) 2%
- Transconductance 200 μA/V
- Low Offset Voltage 1 mV
- Input Bias 12 μA
- PSRR 90 dB
- CMRR 95 dB
- Temperature Range −40°C to 125°C
- 6-Pin SOT Package
- High-Side Current Sense
- Vehicle Current Measurement
- Motor Controls
- Battery Monitoring
- Remote Sensing
- Power Management
The LMP8645 and the LMP8645HV devices are precision current sense amplifiers that detect small differential voltages across a sense resistor in the presence of high-input common-mode voltages.
Operating from a supply range of 2.7 V to 12 V, the LMP8645 accepts input signals with a common-mode voltage range of –2 V to 42 V, while the LMP8645HV accepts input signals with a common-mode voltage range of –2 V to 76 V. The LMP8645 and LMP8645HV have adjustable gain for applications where supply current and high common-mode voltage are the determining factors. The gain is configured with a single resistor, providing a high level of flexibility, as well as accuracy as low as 2% (maximum) including the gain setting resistor. The output is buffered to provide low output impedance. This high-side current sense amplifier is ideal for sensing and monitoring currents in DC or battery-powered systems, has excellent AC and DC specifications over temperature, and keeps errors in the current sense loop to a minimum. The LMP8645 is an ideal choice for industrial, automotive, and consumer applications, and is available in SOT-6 package.
| PART NUMBER | PACKAGE | BODY SIZE (NOM) |
|---|---|---|
| LMP8645 | SOT (6) | 1.60 mm × 2.90 mm |
| LMP8645HV |
- ADS61JB23 - 具有 JESD204A 输出接口的 12 位输入缓冲 80 MSPS ADC
- CD74HC4316 - 具有电平转换功能的高速 CMOS 四路模拟开关
- MAX3222 - 3V 至 5.5V 多通道 RS-232 线路驱动器/接收器
- PGA308 - 具有可编程增益和偏差的单电源自动置零传感器放大器
- TS12A12511 - 具有负信号功能的 5Ω 单通道 SPDT 开关
- SN75462 - 双路高电压大电流外设驱动器
- PTH04T261W - 3-A, 2.2V to 5.5V Input, Ceramic Non-Isolated, Wide Output, Adj Power Module with TurboTrans
- UCC24650 - Output Voltage Monitor with Wake-Up Alarm Signaling
- RM48L950 - 16/32-Bit RISC Flash Microcontroller
- MSP430FE4232 - 用于能量计的 16 位超低功耗微控制器,具有 8KB 闪存和 256B RAM



