LP8557是TI公司的一款背光产品，LP8557是用于平板电脑的 LP8557 高效率 LED 背光驱动器，本页介绍了LP8557的产品说明、应用、特性等，并给出了与LP8557相关的TI元器件型号供参考。
LP8557 - 用于平板电脑的 LP8557 高效率 LED 背光驱动器 - 背光 - LED驱动器 - TI公司（Texas Instruments，德州仪器）
- High-Efficiency DC/DC Boost Converter with 28-V Integrated Power MOSFET
- 2.7-V to 5.5-V VDD Range for Supporting Single-Cell Li-Ion Battery Applications
- Six 25-mA High-Precision LED Current Sinks
- Adaptive Boost Voltage and LED Current Sink Headroom Controls for Maximum System Efficiency
- LED String Count Auto-Detect for Maximum Design Flexibility
- Smart Phase Shift PWM Mode for Reduced Audible Noise
- PWM Input Duty Cycle Brightness Control, PWM Output Frequency Selectable Independent of Input Frequency
- Hybrid PWM + Current Dimming for Higher LED Drive Optical Efficiency
- Switching Frequency, PWM Output Frequency, and LED Current can be set through Resistors or I2C Interface
- Programmable Boost SW Slew Rate Control and Spread Spectrum Scheme for Reduced Switching Noise and Improved EMI Performance
- UVLO, TSD, BST_OVP, BST_OCP, BST_UV, LED Open* and LED Short Fault Coverage
- Minimum Number of External Components
Tablet LCD Display LED Backlight
The LP8557 and LP8557I are high-efficiency LED drivers each featuring an integrated DC-DC inductive boost converter and six high-precision current sinks. LP8557 is intended for applications that exclusively use a Pulse Width Modulated (PWM) signal for controlling the brightness while LP8557I is intended for applications that can utilize an I2C master as well.
The boost converter has adaptive output voltage control. This feature minimizes the power consumption by adjusting the voltage to the lowest sufficient level under all conditions.
The adaptive current sink headroom voltage control scales the headroom voltage with the LED current for optimal system efficiency.
The LED string auto-detect function enables use of the same device in systems with 1 to 6 LED strings for the maximum design flexibility.
Proprietary hybrid PWM + Current mode dimming enables additional system power savings. Phase shift PWM allows reduced audible noise and smaller boost output capacitors.
Flexible CABC support combines brightness level selections based on the PWM input and I2C commands.
| PART NUMBER | PACKAGE | BODY SIZE (MAX) |
|---|---|---|
| LP8557 | DSBGA (16) | 1.906 mm x 1.64 mm |
| LP8557I |
