LT1030是TI公司的一款无产品，LT1030是四路低功耗线路驱动器，本页介绍了LT1030的产品说明、应用、特性等，并给出了与LT1030相关的TI元器件型号供参考。
LT1030 - 四路低功耗线路驱动器 - 无 - RS-232收发器 - TI公司（Texas Instruments，德州仪器）
The LT1030C is an EIA/TIA-232-F line driver that operates over a ±5-V to ±15-V supply-voltage range on low supply current. The device can be shut down to zero supply current. Current limiting fully protects the outputs from externally applied voltages of ±30 V. Since the output swings to within 200 mV of the positive supply and to within 1 V of the negative supply, supply-voltage requirements are minimized.
A major advantage of the LT1030C is the high-impedance output state when the device is off or powered down. This feature allows several different drivers on the same bus.
The device can be used as an EIA/TIA-232-F driver, micropower interface, or level translator, among others.
The LT1030C is characterized for operation from 0°C to 70°C.
The D package is available taped and reeled. Add the suffix R to the device type (i.e., LT1030CDR).
- Low Supply Voltage...±5 V to ±15 V
- Supply Current...500 uA Typical
- Zero Supply Current When Shut Down
- Outputs Can Be Driven ±30 V
- Output Open When Off (3-State)
- 10-mA Output Drive
- Outputs of Several Devices Can Be Connected in Parallel
- Meets or Exceeds the Requirements of ANSI EIA/TIA-232-F Specifications
- Designed to Be Interchangeable With Linear Technology LT1030
