The PTH03060W non-isolated power module is small in size but big on performance and flexibility. Its high output current, compact footprint, and industryleading features offers system designers a versatile module for powering complex multi-processor digital systems.

This product employs double-sided surface mount construction and provides high-performance step-down power conversion for up to 10 A of output current from a 3.3-V input bus voltage. The output voltage is adjustable and can be set to any value over the range, 0.8 V to 2.5 V, using a single resistor.

This series includes Auto-Track™ Sequencing. Auto-Track simplifies the task of supply voltage sequencing in a power system by enabling modules to track each other, or any external voltage, during power up and power down.

Other operating features include an on/off inhibit, margin up/down controls, and the ability to start up into an existing output voltage or prebias. To ensure tight load regulation, an output voltage sense is also provided. A non-latching overcurrent trip serves as load fault protection.

Target applications include complex multi-voltage, multi-processor systems that incorporate the industry’s high-speed DSPs, micro-processors and bus drivers.

• Up to 10-A Output Current
• 3.3 V, Input Voltage
• Wide-Output Voltage Adjust (0.8 V to 2.5 V)
• Efficiencies up to 96%
• 114 W/in³ Power Density
• On/Off Inhibit
• Output Voltage Sense
• Pre-Bias Startup Capability
• Margin Up/Down Controls (±5%)
• Under-Voltage Lockout
• Auto-Track™ Sequencing
• Output Over-Current Protection (Non-Latching, Auto-Reset)
• Operating Temp: –40 to +85°C
• DSP Compatible Output Voltages
• Safety Agency Approvals: UL 1950, CSA 22.2 950, EN60950 VDE (Pending)
• Point-of-Load Alliance (POLA) Compatible