PTH12060W是TI公司的一款非隔离式模块产品，PTH12060W是1.2 至 5.5V 10A 输出 12V 输入的非隔离宽调节模块，本页介绍了PTH12060W的产品说明、应用、特性等，并给出了与PTH12060W相关的TI元器件型号供参考。
PTH12060W - 1.2 至 5.5V 10A 输出 12V 输入的非隔离宽调节模块 - 非隔离式模块 - 电源模块 - TI公司（Texas Instruments，德州仪器）
The PTH12060 series is a non-isolatedpower module, and part of a new class of complete dc/dc converters from Texas Instruments. These modules are small in size, and are an alternative for applications requiring up to 10 A of load current.
The small footprint, (1 inch × 0.62 inch) and industry leading features makes this module suitable for space conscious digital systems that incorporate multiple processors.
This series of modules operate from a 12-V input bus voltage to provide step-down power conversion to a wide range of output voltages. The output voltage of the W-suffix device may be set to any voltage over the adjust range, 1.2 V to 5.5 V. The L-suffix device has an adjustment range of 0.8 V to 1.8 V. The output voltage is set within the adjust range using a single external resistor.
This product includes Auto-Track™ Sequencing. Auto-Track simplifies the task of supply voltage sequencing in a power system, by enabling modules to track each other, or any other external voltage, during power up and power down.
Other features include an on/off inhibit and margin up/down controls. An output voltage sense ensures tight load regulation. Non-latching overcurrent trip protects against load faults.
- Up to 10-A Output Current
- 12-V Input Voltage
- Wide-Output Voltage Adjust(1.2 V to 5.5 V/(0.8 V to 1.8 V)
- Efficiencies up to 95%
- 225 W/in3 Power Density
- Output Voltage Sense
- Margin Up/Down Controls
- Undervoltage Lockout
- Auto-Track Sequencing
- Pre-Bias Start-up Capability using On/Off Inhibit
- Output Overcurrent Protection (Non-latching, Auto-Reset)
- Operating Temperature: -40°C to 85°C
- Safety Agency Approvals: UL/IEC/CSA C22.2 60950-1
- Point-of-Load Alliance (POLA) Compatible
- APPLICATIONS
- Complex Digital
下面可能是您感兴趣的TI公司非隔离式模块元器件
- SN74LVC1G32-EP - 增强型产品二路 2 输入正或门
- UC1856 - 改进的电流模式 PWM 控制器
- ISO7231C-Q1 - 汽车类三通道 2/1 25Mbps 数字隔离器
- NS16C2552 - 具有 16 字节 FIFO 和高达 5 Mbit/s 数据速率的双路 UART
- CC1101-Q1 - 低成本低功耗低于 1GHz 的射频收发器
- LMH0071 - 具有环路输出和 LVDS 接口的 SD、DVB-ASI SDI 解串器
- LM3406HV - 用于驱动高功率 LED 的 1.5A 恒流降压稳压器
- REF2930 - 采用 SOT23-3 封装的 3.0V 100ppm/℃，50uA 系列（带隙）电压基准
- SN75HVD11 - 3.3V 差动收发器
- TPS61041 - 采用 SOT-23 封装用于 LCD 和白光 LED 的 28V 250mA 开关升压转换器
- Complex Digital
