


- TLV2354IPWR - 集成电路(IC) > 线性 > 比较器
- M0L1306QDGS20RQ1 - 集成电路(IC) > 嵌入式 > 微控制器
- SN74AHCT540DWR - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- TPS25859QRPQRQ1 - 集成电路(IC) > 电源管理(PMIC) > 电源管理 - 专用
- SN74AS825ADWRE4 - 逻辑 - 触发器
- TPS3703A4280DSERQ1 - 集成电路(IC) > 电源管理(PMIC) > 监控器
- TLC2934IPWRG4 - 集成电路(IC) > 时钟/定时 > 时钟发生器,PLL,频率合成器
- TPS22929DEVM-661 - 开发板,套件,编程器 > 评估板 > 评估和演示板及套件
- TPS3851H25EQDRBRQ1 - 集成电路(IC) > 电源管理(PMIC) > 监控器
- SN74ABT18504PMR - 集成电路(IC) > 逻辑 > 专用逻辑器件
- SN74AS109AD - 集成电路(IC) > 逻辑 > 触发器
- UCD7230RGWR - 集成电路(IC) > 电源管理(PMIC) > DC-DC 开关控制器
- 5962-9074901MRA - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- TPS76925QDBVRG4Q1 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- LP8340ILDX-5.0/NOPB - 电源管理IC - 稳压器 - 线性
- TLIN1022DMTTQ1 - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- SN65LVDS050IPWRQ1 - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- AMC1203BDUBR - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- LP3971SQ-D510 - 集成电路(IC) > 电源管理(PMIC) > 电源管理 - 专用
- TPS61372YKBR - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器



SE555 - 精密定时器
SE555是TI德州仪器公司的一款无产品,SE555是精密定时器,本站介绍了SE555的封装应用图解、特点和优点、功能等,并给出了与SE555相关的TI元器件型号供参考。
SE555 - 精密定时器 - 无 - 定时器 - 德州仪器
- Timing From Microseconds to Hours
- Astable or Monostable Operation
- Adjustable Duty Cycle
- TTL-Compatible Output Can Sink or Source Up to 200 mA
- On Products Compliant to MIL-PRF-38535, All Parameters Are Tested Unless Otherwise Noted. On All Other Products, Production Processing Does Not Necessarily Include Testing of All Parameters.
- Fingerprint Biometrics
- Iris Biometrics
- RFID Reader
These devices are precision timing circuits capable of producing accurate time delays or oscillation. In the time-delay or mono-stable mode of operation, the timed interval is controlled by a single external resistor and capacitor network. In the a-stable mode of operation, the frequency and duty cycle can be controlled independently with two external resistors and a single external capacitor.
The threshold and trigger levels normally are two-thirds and one-third, respectively, of VCC. These levels can be altered by use of the control-voltage terminal. When the trigger input falls below the trigger level, the flip-flop is set, and the output goes high. If the trigger input is above the trigger level and the threshold input is above the threshold level, the flip-flop is reset and the output is low. The reset (RESET) input can override all other inputs and can be used to initiate a new timing cycle. When RESET goes low, the flip-flop is reset, and the output goes low. When the output is low, a low-impedance path is provided between discharge (DISCH) and ground.
The output circuit is capable of sinking or sourcing current up to 200 mA. Operation is specified for supplies of 5V to 15V. With a 5-V supply, output levels are compatible with TTL inputs.
| PART NUMBER | PACKAGE | BODY SIZE (NOM) |
|---|---|---|
| xx555 | PDIP (8) | 9.81 mm × 6.35 mm |
| SOP (8) | 6.20 mm × 5.30 mm | |
| TSSOP (8) | 3.00 mm × 4.40 mm | |
| SOIC (8) | 4.90 mm × 3.91 mm |
- LM4040D25 - 2.5V 精密微功耗并联电压参考,1% 精确度
- ADS5527 - 14-Bits 190 MSPS ADC With DDR LVDS/CMOS Outputs
- SN65MLVD048 - 4 通道 M-LVDS 接收器
- SN54HC10-SP - 三路 3 输入正与非门
- SN74CB3T1G125 - 具有 5V 容限电平转换器的单路 FET 2.5V/3.3V 低电压总线开关
- SN5497 - 同步 6 位二进制比率乘法器
- REG113 - 400mA、低噪声、低压降稳压器
- LMC567 - Low Power Tone Decoder
- LM628 - 精密运动控制器
- SN74AUP1T50 - 低功耗、1.8/2.5/3.3V 输入、3.3V CMOS 输出,SN74AUP1T50



