

- LP3972SQE-E514 - 电源管理IC - 电源管理 - 专用型
- PT4313A - 板安装电源 > 直流转换器
- SN74AHCT240PW - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- CD74HC373M - 集成电路(IC) > 逻辑 > 锁存器
- CDC2510CPW - 集成电路(IC) > 时钟/定时 > 时钟发生器,PLL,频率合成器
- LMC6022IM - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- SN74CBT16292DL - 集成电路(IC) > 逻辑 > 信号开关,多路复用器,解码器
- BQ24171RGYR - 集成电路(IC) > 电源管理(PMIC) > 电池充电器
- UC2841DW - 集成电路(IC) > 电源管理(PMIC) > DC-DC 开关控制器
- CD74AC240EG4 - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- SN74HC14DG4 - 集成电路(IC) > 逻辑 > 门和反相器
- TLV70729PDQNT - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- TPS40061PWPRG4 - 集成电路(IC) > 电源管理(PMIC) > DC-DC 开关控制器
- SN74ALVC14NSR - 集成电路(IC) > 逻辑 > 门和反相器
- LM7321MF/NOPB - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- CD74AC164M96 - 集成电路(IC) > 逻辑 > 移位寄存器
- SN7414DG4 - 集成电路(IC) > 逻辑 > 门和反相器
- LM2832YSD EVAL - 评估板 - DC-DC 与 AC-DC(离线)SMPS
- MSP430F5507IRGZT - 集成电路(IC) > 嵌入式 > 微控制器
- CD4503BPWR - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器



SN54AC373 - 具有三态输出的八路 D 类透明锁存器
SN54AC373是TI德州仪器公司的一款D类锁存器产品,SN54AC373是具有三态输出的八路 D 类透明锁存器,本站介绍了SN54AC373的封装应用图解、特点和优点、功能等,并给出了与SN54AC373相关的TI元器件型号供参考。
SN54AC373 - 具有三态输出的八路 D 类透明锁存器 - D类锁存器 - 触发器/锁存器/寄存器 - 德州仪器
These 8-bit latches feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. The devices are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.
The eight latches are D-type transparent latches. When the latch-enable (LE) input is high, the Q outputs follow the data (D) inputs. When LE is taken low, the Q outputs are latched at the logic levels set up at the D inputs.
A buffered output-enable (OE)\ input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines in bus-organized systems without need for interface or pullup components.
OE\ does not affect the internal operations of the latches. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
- 2-V to 6-V VCC Operation
- Inputs Accept Voltages to 6 V
- Max tpd of 9.5 ns at 5 V
- 3-State Noninverting Outputs Drive Bus Lines Directly
- Full Parallel Access for Loading
- TPIC46L01 - 6 通道串联/并联低端前置 FET 驱动器
- SN74AHC74-EP - 具有清零和预设功能的增强型产品双路上升沿 D 类触发器
- TPS658610A - 具有锂离子电池充电器的多通道电源管理 IC (PMIC)
- SN74F32 - 四路 2 输入正或门
- CD74HCT574 - 具有三态输出的高速 CMOS 逻辑八路上升沿 D 类触发器
- TPS92551 - 450mA 23W 恒定电流降压 LED 驱动器微型模块
- PTH08T220W - 采用 TurboTrans 技术的 16A 输出 4.5V 至 14V 输入的非隔离宽输出调节电源模块
- SN54LVC138A-SP - 3 线至 8 线解码器/多路解复用器
- LM4312 - Mobile Pixel Link Two (MPL-2), RGB Display Differential Interface Serializer with Optional Ditherin
- CSD18533Q5A - 60V N 通道 NexFET 功率 MOSFET,CSD18533Q5A



