

- COP8SGR744V8/NOPB - 集成电路(IC) > 嵌入式 > 微控制器
- OPA2356AIDGKT - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- SN74AUP1G58DCKR - 集成电路(IC) > 逻辑 > 门和反相器 - 多功能,可配置
- TSB41AB2PAPG4 - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- TPS72301DBVTG4 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- DRV3204EPHPQ1 - 集成电路(IC) > 电源管理(PMIC) > 电机驱动器,控制器
- LP2986AIMX-3.3/NOPB - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- SN761634RTWR - 集成电路(IC) > 线性 > 视频处理
- OPA1671IDCKR - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- RC4136NG4 - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- TL5001IPG4 - 集成电路(IC) > 电源管理(PMIC) > DC-DC 开关控制器
- DP83848IVV/NOPB - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- TPS1HC100EVM - 开发板,套件,编程器 > 评估板 > 评估和演示板及套件
- CD74ACT00M96E4 - 集成电路(IC) > 逻辑 > 门和反相器
- LMR12020XSD/NOPB - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- LMX2582EVM - 开发板,套件,编程器 > 评估板 > 评估和演示板及套件
- LM1117T-5.0/NOPB - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- OPA4376AIPW - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- CY74FCT543CTQC - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- TPS622318DRYR - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器



SN54AHC373 - 具有三态输出的八路透明 D 类锁存器
SN54AHC373是TI德州仪器公司的一款D类锁存器产品,SN54AHC373是具有三态输出的八路透明 D 类锁存器,本站介绍了SN54AHC373的封装应用图解、特点和优点、功能等,并给出了与SN54AHC373相关的TI元器件型号供参考。
SN54AHC373 - 具有三态输出的八路透明 D 类锁存器 - D类锁存器 - 触发器/锁存器/寄存器 - 德州仪器
The AHC373 devices are octal transparent D-type latches designed for 2-V to 5.5-V VCC operation.
When the latch-enable (LE) input is high, the Q outputs follow the data (D) inputs. When LE is low, the Q outputs are latched at the logic levels of the D inputs.
A buffered output-enable (OE)\ input can be used to place the eight outputs in either a normal logic state (high or low) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pullup components.
OE\ does not affect the internal operations of the latches. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
- Operating Range 2-V to 5.5-V VCC
- Latch-Up Performance Exceeds 250 mA Per JESD 17
- ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)
- 1000-V Charged-Device Model (C101)
- BQ24020 - bqTINY-II 单片 1 节锂离子充电器,具有 USB/AC 电源管理、采用 3x3mm2 QFN 封装并具有使能端和温度传感器
- TPS65000 - 采用 2.25MHz 降压转换器且具有双路 LDO 和 SVS 的电源管理 IC (PMIC)
- CD74ACT161 - 具有异步复位的同步可预设的二进制计数器
- LM20242 - 具有可调频率的 4.5-36V、2A 电流模式同步降压稳压器
- TPS65233-1 - TPS65233-1 具有 I2C 接口的 LNB 稳压器
- SN65EL11 - PECL/ECL 1:2 扇出缓冲器
- DAC1221 - 16 位 Δ-Σ 低功耗数模转换器
- TPS76630 - 超低静态电流 250mA LDO 线性稳压器
- TRF37B32 - 具有集成 IF 放大器的双路降压转换器混合器
- BQ24014 - bqTINY(TM) 线性 1 节 (4.2V) 锂离子充电器,具有 1A FET、温度 传感和充电使能端,采用 QFN/MLP-1 封装



