The 'ALS193A are synchronous, reversible, 4-bit up/down binary counters. Synchronous counting operation is provided by having all flip-flops clocked simultaneously so that the outputs change coincident with each other when instructed by the steering logic. This mode of operation eliminates the output counting spikes normally associated with asynchronous (ripple-clock) counters.

The outputs of the four flip-flops are triggered on a low-to-high-level transition of either count/clock (UP or DOWN) input. The direction of the count is determined by which count input is pulsed while the other count input is high.

All four counters are fully programmable; that is, each output may be preset to either level by placing a low on the load () input and entering the desired data at the data inputs. The output changes to agree with the data inputs independently of the count pulses. This feature allows the counters to be used as modulo-N dividers by simply modifying the count length with the preset inputs.

A high level applied to the clear (CLR) input forces all outputs to the low level. The clear function is independent of the count and i nputs. The UP, DOWN, and inputs are buffered to lower the drive requirement, which significantly reduces the loading on, or current required by, clock drivers, etc., for long parallel words.

These counters are designed to be cascaded without the need for external circuitry. The borrow () output produces a low-level pulse while the count is zero (all Q outputs low) and the DOWN input is low. Similarily, the carry (CO\) output produces a low-level pulse while the count is 9 or 15 (all Q outputs high) and the UP input is low. The counters can then be easily cascaded by feeding and to the count-down and count-up inputs, respectively, of the succeeding counter.

The SN54ALS193A is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ALS193A is characterized for operation from 0°C to 70°C.

• Look-Ahead Circuitry Enhances Cascaded Counters
• Fully Synchronous in Count Modes
• Parallel Asynchronous Load for Modulo-N Count Lengths
• Asynchronous Clear
• Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 300-mil DIPs

• CD74HCT534 - 具有三态输出的高速 CMOS 逻辑八路上升沿的 D 类反向触发器
• LM3404HV - 用于高功率 LED 驱动器的 1.0A 恒流降压稳压器
• TPS2055A - 0.345A、2.7-5.5V 单路高侧 MOSFET、故障报告、工作态高电平启用
• UC1526A - 稳压脉宽调制器
• TPS54228 - 具有轻载效率的 4.5V 至 18V 输入、2A 同步降压转换器
• TMP441 - 具有自动 β、N 因数和串联电阻校正的 ±1°C 远程和本地温度传感器
• SN54AC374 - 具有三态输出的八路 D 类边沿触发器
• BQ2004H - 具有负 dV、峰值电压检测、dT/dt 终端的镍镉电池/镍氢电池开关模式充电管理 IC
• SN54LS08 - 四路 2 输入正与门
• CD54HC4316 - 具有电平转换功能的高速 CMOS 逻辑四路模拟开关