• Meets the Requirements of ISO11898-2
• Turbo CAN:
  • Specified for 2-Mbps CAN FD (CAN with Flexible Data Rate)
  • Short and Symmetrical Propagation Delay Times and Fast Loop Times for Enhanced Timing Margin
  • Higher Data Rates in CAN Networks
• I/O Voltage Range Supports 3.3-V and 5-V MCUs
• Ideal Passive Behavior When Unpowered
  • Bus and Logic Terminals are High Impedance (no load)
  • Power-Up/Down With Glitch Free Operation On Bus
• Protection Features
  • HBM ESD Protection Exceeds ±12 kV
  • Bus Fault Protection –27 V to 40 V
  • Undervoltage Protection on Supply Terminals
  • Driver Dominant Time Out (TXD DTO)
  • SN65HVD267: Receiver Dominant Time Out (RXD DTO)
  • SN65HVD267: FAULT Output Terminal
  • Thermal Shutdown Protection
• Characterized for –40°C to 125°C Operation

• 2-Mbps Operation in CAN with Flexible Data Rate Networks
• 1-Mbps Operation in Highly Loaded CAN Networks Down to 10-kbps Networks Using TXD DTO
• Industrial Automation, Control, Sensors and Drive Systems
• Building, Security and Climate Control Automation
• Telecom Base Station Status and Control
• SN65HVD267: Functional Safety With Redundant and Multi-topology CAN networks
• CAN Bus Standards Such as CANopen, DeviceNet, NMEA2000, ARNIC825, ISO11783, CANaerospace

This CAN transceiver meets the ISO1189-2 High Speed CAN (Controller Area Network) physical layer standard. It is designed for data rates in excess of 2 Mpbs (megabits per second) for CAN FD (CAN with flexible data rate), greater than 1 Mbps for CAN in short networks, and enhanced timing margin and higher data rates in long and highly-loaded networks. The device provides many protection features to enhance device and CAN-network robustness. The SN65HVD267 adds additional features, allowing easy design of redundant and multi-topology networks with fault indication for higher levels of safety in the CAN system.