

- LMZ12003EVAL/NOPB - 开发板,套件,编程器 > 评估板 > DC/DC 和 AC/DC(离线)SMPS 评估板
- TLC59213AIPWT - 集成电路(IC) > 电源管理(PMIC) > 配电开关,负载驱动器
- SN74ACT245RKSR - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- LM4040AIM3X-3.0/NOPB - 集成电路(IC) > 电源管理(PMIC) > 电压基准
- SN74ALVCH244NSR - 集成电路(IC) > 逻辑 > 缓冲器,驱动器,接收器,收发器
- TMDSCBL560 - 开发板,套件,编程器 > 开发板,编程器配件
- TMDXICE110 - 开发板,套件,编程器 > 评估板 > 嵌入式 MCU、DSP 评估板
- PT6444N - 板安装电源 > 直流转换器
- DM-COP8/44P - 开发板,套件,编程器 > 开发板,编程器配件
- LM2597MX-3.3 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- PDRV5033FAEDBZRQ1 - 传感器,变送器 > 磁性传感器 > 开关(固态)
- OPA814DR - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- OPA642N/3K - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- ISOM8117DFGR - 隔离器 > 光隔离器 > 晶体管,光电输出光隔离器
- SN74CBT3253DBRG4 - 集成电路(IC) > 逻辑 > 信号开关,多路复用器,解码器
- DAC7714UG4 - 集成电路(IC) > 数据采集 > 数模转换器(DAC)
- TLV2464CPWR - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- INA168QPWRG4Q1 - 集成电路(IC) > 电源管理(PMIC) > 电流调节/管理
- CD4520BME4 - 集成电路(IC) > 逻辑 > 计数器,除法器
- LM4040D25IDBZRG4 - 集成电路(IC) > 电源管理(PMIC) > 电压基准



SN65LVCP15 - 用于光纤通道、千兆以太网 HDTV 和 SATA 的链路复制器
SN65LVCP15是TI德州仪器公司的一款复用缓冲器产品,SN65LVCP15是用于光纤通道、千兆以太网 HDTV 和 SATA 的链路复制器,本站介绍了SN65LVCP15的封装应用图解、特点和优点、功能等,并给出了与SN65LVCP15相关的TI元器件型号供参考。
SN65LVCP15 - 用于光纤通道、千兆以太网 HDTV 和 SATA 的链路复制器 - 复用缓冲器 - 信号调节器 - 德州仪器
The SN65LVCP15 is a high performance serial link mux for use in Fibre Channel (1.0625 Gb/s), Gigabit Ethernet (1.25 Gb/s), and other high speed interface applications. A common application involves a serializer/deserializer (SerDes), such as the TLK2201B, which would normally be connected to the IN± and OUT± ports in order to provide duplicate set of links on the IN0/OUT0 and IN1/OUT1 ports. This type of application is often used to implement high speed test ports that can be monitored without affecting the serial data stream of the application. A popular application is in Line Cards, that use serial links from a SerDes like TLK2201B (SLLS585), where the SN65LVCP15 provides redundant, hot-swappable links to redundant Switch Fabric Cards.
During normal operation, IN is sent to both OUT0 and OUT1 whose buffers are enabled when OE0 and OE1 are HIGH. OUT0 can select between IN and IN1. OUT1 can select between IN and IN0. OUT can select between IN0 and IN1.
In Link Replicator applications, such as the Line Card to Switch Card links, IN is transmitted to both OUT0 and OUT1 which either IN0 or IN1 is selected at OUT. In host Adapter applications, IN goes to OUT0 (an internal connector) which returns data and IN0. IN0 is looped to OUT1 (an external connector) which returns data on IN1 and then back to the SerDes on OUT.
- Replicates Serial Links Such as Fibre Channel, Gigabit Ethernet, and HDTV Links
- T11 Fibre Channel Compliant at 1.0634 Gb/s
- IEEE802.3-2005 Gigabit Ethernet Compliant at 1.25 Gb/s (1000Base-X)
- Support for SMPTE-292M Data Rate at 1.485Gb/s
- Compatible With VSC7132-01
- No External Components Required
- 0.455 W Maximum Power Dissipation
- 3.3 V Power Supply
- 28-Pin, 4,4 mm × 9,7 mm TSSOP Package
- Footprint Compatible with VSC7132
- TS5A6542 - 具有输入逻辑转换的 0.75Ω SPDT 模拟开关
- UCC5640 - 9 线路 2.7-5V LVD 端接器,用于 Ultra2 至 Ultra320 SCSI
- MSP430F4618 - 16 位超低功耗 MCU,具有 116KB 闪存、8KB RAM、12 位 ADC、DMA 和 160 段 LCD
- DS90CR485 - 133MHz LVDS 48 位频道链接串行器
- SN74HC266 - 使用漏极开路输出的四路 2 输入异或非门
- DS90UH925Q-Q1 - 具有 HDCP 的 5 - 85 MHz 24 位彩色 FPD-Link III 串行器
- TAS5103 - 15W 立体声数字放大器功率级
- TPS3510 - 用于开关模式电源的 3 通道监控器
- ADS5292 - 八通道 12 位、80MSPS 高 SNR 和低功耗 ADC
- TLV702-Q1 - 汽车类 300mA、低 IQ、低压降稳压器



