SN74AUP1T08 - 低功耗、1.8/2.5/3.3V 输入、3.3V CMOS 输出、2 输入正与门

SN74AUP1T08是TI德州仪器公司的一款无产品，SN74AUP1T08是低功耗、1.8/2.5/3.3V 输入、3.3V CMOS 输出、2 输入正与门，本站介绍了SN74AUP1T08的封装应用图解、特点和优点、功能等，并给出了与SN74AUP1T08相关的TI元器件型号供参考。

SN74AUP1T08 - 低功耗、1.8/2.5/3.3V 输入、3.3V CMOS 输出、2 输入正与门 - 无 - 小尺寸逻辑器件 - 德州仪器

产品描述

产品特性

Single-Supply Voltage Translator
Output Level Up to Supply VCC CMOS Level
- 1.8 V to 3.3 V (at VCC = 3.3 V)
- 2.5 V to 3.3 V (at VCC = 3.3 V)
- 1.8 V to 2.5 V (at VCC = 2.5 V)
- 3.3 V to 2.5 V (at VCC = 2.5 V
Schmitt-Trigger Inputs Reject Input Noise and Provide Better Output Signal Integrity
Ioff Supports Partial Power Down (VCC = 0 V)
Very Low Static Power Consumption: 0.1 µA
Very Low Dynamic Power Consumption: 0.9 µA
Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
Pb-Free Packages Available: SC-70 (DCK) 2 × 2.1 × 0.65 mm (Height 1.1 mm)
More Gate Options Available at www.ti.com/littlelogic
ESD Performance Tested Per JESD 22
- 2000-V Human-Body Model (A114-B, Class II)
- 1000-V Charged-Device Model (C101)

DESCRIPTION/ORDERING INFORMATION

The SN74AUP1T08 performs the Boolean function Y = A • B or Y = A\ + B\ with designation for logic-level translation applications with output referenced to supply VCC.

AUP technology is the industry's lowest-power logic technology designed for use in extending battery-life in operating. All input levels that accept 1.8-V LVCMOS signals, while operating from either a single 3.3-V or 2.5-V VCC supply. This product also maintains excellent signal integrity (see Figure 1 and Figure 2).

The wide VCC range of 2.3 V to 3.6 V allows the possibility of switching output level to connect to external controllers or processors.

Schmitt-trigger inputs (VT = 210 mV between positive and negative input transitions) offer improved noise immunity during switching transitions, which is especially useful on analog mixed-mode designs. Schmitt-trigger inputs reject input noise, ensure integrity of output signals, and allow for slow input signal transition.

Ioff is a feature that allows for powered-down conditions (VCC = 0 V) and is important in portable and mobile applications. When VCC = 0 V, signals in the range from 0 V to 3.6 V can be applied to the inputs and outputs of the device. No damage occurs to the device under these conditions.

The SN74AUP1T08 is designed with optimized current-drive capability of 4 mA to reduce line reflections, overshoot, and undershoot caused by high-drive outputs.

下面可能是您感兴趣的TI德州仪器公司无元器件

TI公司产品现货专家，订购TI公司产品不限最低起订量，TI芯片大陆现货即时发货，香港库存3-5天发货，海外库存7-10天发货

寻找全球TI代理商现货货源 - TI公司（德州仪器）电子元件在线订购