SN74AUP1T34-Q1是TI公司的一款无产品，SN74AUP1T34-Q1是1 位单向电压电平转换器，SN74AUP1T34-Q1，本页介绍了SN74AUP1T34-Q1的产品说明、应用、特性等，并给出了与SN74AUP1T34-Q1相关的TI元器件型号供参考。
SN74AUP1T34-Q1 - 1 位单向电压电平转换器，SN74AUP1T34-Q1 - 无 - 小尺寸逻辑器件 - TI公司（Texas Instruments，德州仪器）
The SN74AUP1T34-Q1 is a 1-bit non-inverting translator that uses two separate configurable power-supply rails. It is a uni-directional translator from A to B. The A port is designed to track VCCA. VCCA accepts supply voltages from 0.9 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts supply voltages from 0.9 V to 3.6 V. This allows for low-voltage translation between 1-V, 1.2-V, 1.5-V, 1.8-V, 2.5-V, and 3.3-V voltage nodes. The SN74AUP1T34-Q1 is also fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
The VCC isolation feature ensures that if VCCA input is at GND, the B port is in the high-impedance state. If VCCB input is at GND, any input to the A side does not cause the leakage current even floating.
DCK PACKAGE (TOP VIEW)
- Qualified for Automotive Applications
- AEC-Q100 Qualified
- Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature
- Device HBM ESD Classification Level 3A
- Device CDM ESD Classification Level C5
- Wide Operating VCC Range of 0.9 V to 3.6 V
- Balanced Propagation Delays: tPLH = tPHL (1.8 V to 3.3 V Translation Typical)
- Low Static-Power Consumption, 5 µA Max ICC
- ±6 mA Output Drive at 3 V
- Ioff Supports Partial Power-Down-Mode Operation
- VCC Isolation Feature – If VCCA Input Is at GND, B Port Is in the High-Impedance state
- Input Hysteresis Allows Slow Input Transition and Better Switching Noise Immunity at Input
- ESD Protection Exceeds JESD 22
- 5000-V Human-Body Model (AEC-Q100-002-E)
- Latch-Up Performance Meets 100mA Per Q100-004-D
