SN74HC74-Q1是TI公司的一款D类触发器产品，SN74HC74-Q1是具有清零和预设功能的汽车类双路 D 类正边沿触发触发器，本页介绍了SN74HC74-Q1的产品说明、应用、特性等，并给出了与SN74HC74-Q1相关的TI元器件型号供参考。
SN74HC74-Q1 - 具有清零和预设功能的汽车类双路 D 类正边沿触发触发器 - D类触发器 - 触发器/锁存器/寄存器 - TI公司（Texas Instruments，德州仪器）
- Qualified for Automotive Applications
- Wide Operating Voltage Range of 2 V to 6 V
- Outputs Can Drive Up To 10 LSTTL Loads
- Low Power Consumption, 80-µA Max ICC
- Typical tpd = 15 ns
- ±4-mA Output Drive at 5 V
- Low Input Current of 1 µA Max
description/ordering information
The SN74HC74 device contains two independent D-type positive-edge-triggered flip-flops. A low level at the preset (PRE) or clear (CLR) inputs sets or resets the outputs, regardless of the levels of the other inputs. When PRE and CLR are inactive (high), data at the data (D) input meeting the setup time requirements are transferred to the outputs on the positive-going edge of the clock (CLK) pulse. Clock triggering occurs at a voltage level and is not directly related to the rise time of CLK. Following the hold-time interval, data at the D input can be changed without affecting the levels at the outputs.
