These bidirectional shift registers are designed to incorporate virtually all of the features a system designer may want in a shift register. The circuit contains 46 equivalent gates and features parallel inputs, parallel outputs, right-shift and left-shift serial inputs, operating-mode-control inputs, and a direct overriding clear line. The register has four distinct modes of operation, namely: Inhibit clock (do nothing) Shift right (in the direction QA toward QD) Shift left (in the direction QD toward QA) Parallel (broadside) load

Synchronous parallel loading is accomplished by applying the four bits of data and taking both mode control inputs, S0 and S1, high. The data are loaded into the associated flip-flops and appear at the outputs after the positive transition of the clock input. During loading, serial data flow is inhibited.

Shift right is accomplished synchronously with the rising edge of the clock pulse when S0 is high and S1 is low. Serial data for this mode is entered at the shift-right data input. When S0 is low and S1 is high, data shifts left synchronously and new data is entered at the shift-left serial input.

Clocking of the shift register is inhibited when both mode control inputs are low. The mode controls of the SN54194/SN74194 should be changed only while the clock input is high.

• Parallel Inputs and Outputs
• Four Operating Modes:
  • Synchronous Parallel Load
  • Right Shift
  • Left Shift
  • Do Nothing
• Positive Edge-Triggered Clocking
• Direct Overriding Clear

• TSB41LV06A - IEEE 1394a 六端口电缆收发器/仲裁器
• TL16C2552 - 具有 16 字节 FIFO 的 1.8V 至 5V 双路 UART
• BQ2204A - 用于 4 SRAM 内存组的 SRAM 非易失性控制器 IC
• TPS61013 - 具有固定 2.5V 输出的低输入电压同步升压转换器
• SN74LVTH273 - 具有清零功能的 3.3V ABT 八路 D 类触发器
• TLC2578 - 串行输出、低功耗，具有内置转换时钟 8x FIFO、8 通道
• SN75162B - 八路通用接口总线收发器
• LMZ14201 - SIMPLE SWITCHER? 6V 至 42V、1A 电源模块，采用带引线表面贴装 TO 封装
• LM335 - 模拟输出温度传感器，军用级，采用气密性 TO-92 封装
• BQ24158 - 与 USB 完全兼容的完全集成开关模式单节锂离子充电器，VOVP=6.5v