SN75173 - 四路差动线路接收器

SN75173是TI德州仪器公司的一款无产品，SN75173是四路差动线路接收器，本站介绍了SN75173的封装应用图解、特点和优点、功能等，并给出了与SN75173相关的TI元器件型号供参考。

SN75173 - 四路差动线路接收器 - 无 - RS-485收发器 - 德州仪器

产品描述

The SN55173, SN65173, and SN75173 are monolithic quadruple differential line receivers with 3-state outputs. They are designed to meet the requirements of TIA/EIA-422-B, TIA/EIA-423-B, TIA/EIA-485-A, and several ITU recommendations. The standards are for balanced multipoint bus transmission at rates up to 10 megabits per second. The four receivers share two OR enable inputs, one active when high, the other active when low. These devices feature high input impedance, input hysteresis for increased noise immunity, and input sensitivity of ±200 mV over a common-mode input voltage range of \x9612 V to 12 V. Fail-safe design specifies that if the inputs are open circuited, the outputs are always high. The SN65173 and SN75173 are designed for optimum performance when used with the SN75172 or SN75174 quad differential line drivers.

The SN55173 is characterized over the full military temperature range of \x9655°C to 125°C. The SN65173 is characterized for operation from \x9640°C to 85°C. The SN75173 is characterized for operation from 0°C to 70°C.

产品特性

Meet or Exceed the Requirements of TIA/EIA-422-B, TIA/EIA-423-B, and TIA/EIA-485-A and ITU Recommendations V.10, V.11, X.26, and X.27
Designed for Multipoint Bus Transmission on Long Bus Lines in Noisy Environments
3-State Outputs
Common-Mode Input Voltage Range of \x9612 V to 12 V
Input Sensitivity ... ±200 mV
Input Hysteresis . . . 50 mV Typ
High Input Impedance . . . 12 k Min
Operate From Single 5-V Supply
Low Power Requirements
Pin-to-Pin Replacement for AM26LS32

THE SN55173 IS NOT RECOMMENDED FOR NEW DESIGNS.

下面可能是您感兴趣的TI德州仪器公司无元器件

TI公司产品现货专家，订购TI公司产品不限最低起订量，TI芯片大陆现货即时发货，香港库存3-5天发货，海外库存7-10天发货

寻找全球TI代理商现货货源 - TI公司（德州仪器）电子元件在线订购