The TAS5611A is a high performance analog input Class D amplifier with integrated closed loop feedback technology (known as PurePath™ HD) with the ability to drive up to 125W(1) Stereo into 4 to 8 Ω Speakers from a single 32.5V supply.

PurePath™ HD technology enables traditional AB-Amplifier performance (<0.03% THD) levels while providing the power efficiency of traditional class D amplifiers.

Unlike traditional Class D amplifiers, the distortion curve only increases once the output levels move into clipping.

PurePath™ HD technology enables lower idle losses making the device even more efficient.

(1) Achievable output power levels are dependent on the thermal configuration of the target application. A high performance thermal interface material between the package exposed heatslug and the heat sink should be used to achieve high output power levels.

• PurePath™ HD Enabled Integrated Feedback Provides:
  • Signal Bandwidth up to 80kHz for High Frequency Content From HD Sources
  • Ultralow 0.03% THD at 1W into 4Ω
  • Flat THD at all Frequencies for Natural Sound
  • 80dB PSRR (BTL, No Input Signal)
  • >100dB (A weighted) SNR
  • Click and Pop Free Startup
• Pin compatible with TAS5630, TAS5615 and TAS5613
• Multiple Configurations Possible on the Same PCB With Stuffing Options:
  • Mono Parallel Bridge Tied Load (PBTL)
  • Stereo Bridge Tied Load (BTL)
  • 2.1 Single Ended Stereo Pair and Bridge Tied Load Subwoofer
• Total Output Power at 10%THD+N
  • 250W in Mono PBTL Configuration into 2Ω
  • 125W per Channel in Stereo BTL Configuration into 4Ω
• Total Output Power in BTL configuration at 1%THD+N
  • 130W Stereo into 3Ω
  • 105W Stereo into 4Ω
  • 70W Stereo into 6Ω
  • 55W Stereo into 8Ω
• >90% Efficient Power Stage With 60-mΩ Output MOSFETs
• Self-Protection Design (Including Undervoltage, Overtemperature, Clipping, and Short-Circuit Protection) With Error Reporting
• EMI Compliant When Used With Recommended System Design
• Thermally Enhanced Package Options:
  • PHD (64-Pin QFP)
• APPLICATIONS
  • Home Theater Systems
  • AV Receivers
  • DVD/Blu-ray Receivers
  • Mini Combo System
  • Active Speakers and Subwoofers

(1) Achievable output power levels are dependent on the thermal configuration of the target application. A high performance thermal interface material between the package exposed heatslug and the heat sink should be used to achieve high output power levels. All other trademarks are the property of their respective owners

• THS12082 - 12 位、8MSPS ADC，具有双通道、DSP/uP 接口、16X FIFO、通道自动扫描、低功耗
• UC1875-SP - 相移谐振控制器
• BQ2005 - NiCd/NiMH 开关模式充电管理 IC，用于双电池组的顺序充电
• LM3212 - Step-Down DC-DC Converter with Analog Bypass Mode for RF Power Amplifiers
• SN74VMEH22501A - 具有三态输出的 8 位通用总线收发器和两个 1 位总线收发器
• SN54HC161 - 同步 4 位二进制计数器
• TPA711 - 具有单声道耳机驱动的单声道 AB 类音频放大器
• LM3489-Q1 - 具有使能引脚的汽车级、4.5-35V、滞后非同步 PFET 降压控制器
• LM3429 - 用于恒流 LED 驱动器的 N 通道控制器
• LMP90080-Q1 - 具有真正连续后台校准的汽车类多通道低功耗 16 位传感器 AFE