

- LP5907UVX-1.8/NOPB - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- TLE2022MD - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- TPS25985EVM - 开发板,套件,编程器 > 评估板 > 评估和演示板及套件
- SN74CBT3253DRE4 - 集成电路(IC) > 逻辑 > 信号开关,多路复用器,解码器
- TLV320AIC15CDBTG4 - 接口 - 编解码器
- LM10CWMX - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- MSP430AFE253IPWR - 集成电路(IC) > 嵌入式 > 微控制器
- THS3112EVM - 评估板 - 运算放大器
- SN74LVC1G06DCKRE4 - 集成电路(IC) > 逻辑 > 门和反相器
- SN74ABT7819A-10PH - 逻辑 - FIFO 存储器
- TPS92641PWP/NOPB - 集成电路(IC) > 电源管理(PMIC) > LED 驱动器
- LMH6642MA/NOPB - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- LM2750SDX-ADJ - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- TRSF3222CDBRG4 - 集成电路(IC) > 接口 > 驱动器,接收器,收发器
- LMC6044IN - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器
- LM3670MF-3.3 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- LM2841XQMK/NOPB - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - DC-DC 开关稳压器
- LM2614ATL - 集成电路(IC) > 电源管理(PMIC) > 特殊用途稳压器
- UC285TDKTTT-1 - 集成电路(IC) > 电源管理(PMIC) > 稳压器 - 线性
- OPA1678IDR - 集成电路(IC) > 线性 > 放大器 > 仪器,运算放大器,缓冲器



TL598 - 脉宽调制 (Pwm) 控制电路
TL598是TI德州仪器公司的一款PWM与谐振控制器产品,TL598是脉宽调制 (Pwm) 控制电路,本站介绍了TL598的封装应用图解、特点和优点、功能等,并给出了与TL598相关的TI元器件型号供参考。
TL598 - 脉宽调制 (Pwm) 控制电路 - PWM与谐振控制器 - 离线隔离型DC/DC控制器和转换器 - 德州仪器
The TL598 incorporates all the functions required in the construction of pulse-width-modulated (PWM) controlled systems on a single chip. Designed primarily for power-supply control, the TL598 provides the systems engineer with the flexibility to tailor the power-supply control circuits to a specific application.
The TL598 contains two error amplifiers, an internal oscillator (externally adjustable), a dead-time control (DTC) comparator, a pulse-steering flip-flop, a 5-V precision reference, undervoltage lockout control, and output control circuits. Two totem-pole outputs provide exceptional rise- and fall-time performance for power FET control. The outputs share a common source supply and common power ground terminals, which allow system designers to eliminate errors caused by high current-induced voltage drops and common-mode noise.
The error amplifier has a common-mode voltage range of 0 V to VCC - 2 V. The DTC comparator has a fixed offset that prevents overlap of the outputs during push-pull operation. A synchronous multiple supply operation can be achieved by connecting RT to the reference output and providing a sawtooth input to CT.
The TL598 device provides an output control function to select either push-pull or parallel operation. Circuit architecture prevents either output from being pulsed twice during push-pull operation. The output frequency for push-pull applications is one-half the oscillator frequency (fo=1/2 RT CT). For single-ended applications: (fo=1/RT CT)
- Complete PWM Power-Control Function
- Totem-Pole Outputs for 200-mA Sink or Source Current
- Output Control Selects Parallel or Push-Pull Operation
- Internal Circuitry Prohibits Double Pulse at Either Output
- Variable Dead-Time Provides Control Over Total Range
- Internal Regulator Provides a Stable 5-V Reference Supply, Trimmed to 1% Tolerance
- On-Board Output Current-Limiting Protection
- Undervoltage Lockout for Low VCC Conditions
- Separate Power and Signal Grounds
- LM4562 - 双通道超低失真、高性能音频运算放大器
- SN65HVD888 - 具有 IEC-ESD 保护的 SN65HVD888 总线极性校正 RS-485 收发器
- SN54S139 - 双路 2 线路至 4 线路解码器/多路解复用器
- REG711-3 - 50mA 开关电容 DC/DC 转换器
- SN74HC27 - 三路 3 输入正或非门
- MSP430F67651 - MSP430F677x1、MSP430F676x1 、MSP430F674x1 混合信号微处理器
- CD74HC74 - 具有设置和复位功能的高速 CMOS 逻辑双路上升沿 D 类触发器
- TL497A - 500mA 峰值升压、步降、反向开关稳压器
- ADS1018 - 具有集成 MUX、PGA、温度传感器、振荡器和参考的 12 位 ADC
- CSD17573Q5B - CSD17573Q5B 30 V、N 通道 NexFET 功率 MOSFET



