TLC59213A是TI公司的一款标牌/线性产品，TLC59213A是具有锁存器和更长保持时间的 8 位并行输入/输出达林顿源驱动器，本页介绍了TLC59213A的产品说明、应用、特性等，并给出了与TLC59213A相关的TI元器件型号供参考。
TLC59213A - 具有锁存器和更长保持时间的 8 位并行输入/输出达林顿源驱动器 - 标牌/线性 - LED驱动器 - TI公司（Texas Instruments，德州仪器）
- Output Current on Each Channel (IOUT Max = –500 mA)
- VCE(sus) = 13.2 V
- Input Compatible With TTL/5-V CMOS
- Clear (CLR) and Clock (CLK) TTL/CMOS Control Inputs
- CLR Control Input to Off the Output
- Darlington Source Driver
- Clock Input Up to 1 MHz
- Enhanced Hold Time (th) on TLC59213A
- Temperature Range: –40°C to 85°C
- Lamp and Display (LED)
- Hammer
- Relay
The TLC59213 and TLC59213A are 8-bit source drivers with input latch with CLK input and CLR to set the output OFF. The TLC59213 and TLC59213A have large output source currents up to 500 mA with Darlington transistor and collectors tied to VCC. These feature make the device optimum level of driving the matrix of ink jet printer head, LEDs, and the scan-side of resistor's matrix. The TLC59213 and TLC59213A differ only in the Data Hold Time Specification (th).
The clamp diode is between output and ground for switching inductive load.
All inputs are TTL/CMOS, which enable to any logic-level inputs such as MCU, CPU or SN74LV594 (serial to parallel) and the output enable LED matrix display. It can also be used with another device sink driver such as TLC59210, TLC59211 and TLC59212.
| PART NUMBER | PACKAGE | BODY SIZE (NOM) |
|---|---|---|
| TLC59213 TLC59213A | PDIP (20) | 24.33 mm × 6.35 mm |
| TSSOP (20) | 6.50 mm × 4.40 mm |
