TLK3114SC - 10Gbps XAUI 收发器

TLK3114SC是TI德州仪器公司的一款1G-40G以太网/光纤通道收发器产品，TLK3114SC是10Gbps XAUI 收发器，本站介绍了TLK3114SC的封装应用图解、特点和优点、功能等，并给出了与TLK3114SC相关的TI元器件型号供参考。

TLK3114SC - 10Gbps XAUI 收发器 - 1G-40G以太网/光纤通道收发器 - 串行器、解串器 - 德州仪器

产品描述

The TLK3114SC device is a flexible quad serial transceiver, delivering high-speed, bidirectional, point-to-point data transmissions to provide up to 10 Gbps of data transmission capacity. The TLK3114SC device is terminal compatible with the TLK3104SA quad serial transceiver and supports an operating range of serial data rates from 2.5 Gbps to 3.125 Gbps. The primary application of this device is to provide building blocks for developing point-to-point baseband data transmission over controlled impedance media of approximately 50 . The transmission media can be printed-circuit board (PCB) traces, copper cables, or fiber-optical media. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling into the lines.

The TLK3114SC device performs the parallel-to-serial, serial-to-parallel conversion, and clock extraction functions for a physical layer interface. The TLK3114SC device also provides a selectable 8-b/10-b encode/decode function. The serial transmitter is implemented using differential pseudoemitter controlled logic (PECL) compatible signaling called voltage mode logic (VML) that eliminates the need for external components. The serial receiver employs an equalization circuit to maximize receive capabilities.

The four transceivers in the TLK3114SC device can be configured as either four separate links or synchronized together as a single data path. The TLK3114SC device supports both the 32-bit data path, 4-bit control, 10-gigabit media independent interface (XGMII), and the extended auxiliary unit interface (XAUI) specified in the IEEE 802.3ae 10-Gigabit Ethernet standard.

The TLK3114SC evice supports the IEEE 802.3 defined management data input/output (MDIO) interface to allow ease in configuration and status monitoring of the link.

The TLK3114SC device supports the IEEE 1149.1 defined JTAG test port for ease in board manufacturing test. It also supports a comprehensive series of built-in tests for self-test purposes including internal serial loopback and pseudorandom bit stream (PRBS) generation and verification.

The TLK3114SC device operates with a single 2.5-V supply and dissipates less than 3 W. The device is packaged in a 19x19 mm, 289-terminal plastic ball grid array (PBGA) package and is characterized for operation from 0°C to 70°C.

The TLK3114SC device is a member of a family of CMOS multi-gigabit transceivers, intended for use in high-speed bidirectional point-to-point data transmission systems.

产品特性

Quad 3.125 Gbps per channel transceiver providing 10-Gbps data throughput
IEEE 802.3 10-Gbps ethernet XGXS compliant including:
- XGMII parallel interface to MAC and XAUI serial interfaces
- Clock tolerance compensation with column add/drop
- XAUI interpacket gap /A/, /K/, and /R/ code generation and stripping
- Remote and local fault reporting on the XGMII as defined
MDIO interface
Selectable synchronized or independent channel operation
Selectable transmit only, receiver only, transceiver, and repeater functions
Selectable on-chip 8-b/10-b ENDEC
On-chip receive equalization
Receiver differential input thresholds 200 mVP-P
On-chip 100- differential receiver termination
No external filter capacitors required
VML serial driver providing PECL-compatible differential signaling with no external components
Auto-selects between HSTL or SSTL_2 Class 1 I/O with on-chip 50- series termination on outputs
Able to operate with a single 2.5-V power supply
On-chip PRBS generation and verification controlled from external terminal
IEEE 1149.1 JTAG test interface
Hot plug protection
Mainstream 250-nm CMOS technology
Small footprint 19×19 mm, 289-ball PBGA package

下面可能是您感兴趣的TI德州仪器公司1G-40G以太网/光纤通道收发器元器件

TI公司产品现货专家，订购TI公司产品不限最低起订量，TI芯片大陆现货即时发货，香港库存3-5天发货，海外库存7-10天发货

寻找全球TI代理商现货货源 - TI公司（德州仪器）电子元件在线订购