TPS2075是TI公司的一款含LDO的开关产品，TPS2075是用于总线/自供电 USB 集线器的电源控制器，具有 3.3V LDO、8 个电源开关以及工作态高电平 BP 模式指示信号，本页介绍了TPS2075的产品说明、应用、特性等，并给出了与TPS2075相关的TI元器件型号供参考。
TPS2075 - 用于总线/自供电 USB 集线器的电源控制器，具有 3.3V LDO、8 个电源开关以及工作态高电平 BP 模式指示信号 - 含LDO的开关 - USB电源和充电端口控制器 - TI公司（Texas Instruments，德州仪器）
The TPS2074 and TPS2075 provide a complete USB hub power solution by incorporating three major functions: current-limited power switches for four ports, a 3.3-V 100-mA regulator, and a DP0 line control to signal attach/detach of the hub.
These devices are designed to meet bus-powered and self-powered hub requirements. These devices are also designed for hybrid hub implementations and allow for automatic switching from self-powered mode to bus-powered mode if loss of self-power is experienced. This feature can be disabled by applying a logic high to the BP_DIS input
Each port has a current-limited 100-m N-channel MOSFET high-side power switch for 100-mA bus-powered operation. All the N-channel MOSFETs are designed without parasitic diodes, preventing current backflow into the inputs.
For applications where a 5-V regulator is needed, use the TPS2070 or TPS2071 device.
- Complete USB Hub Power Solution
- Meets USB Specifications 1.1 and 2.0
- Independent Thermal and Short-Circuit Protection
- 3.3-V Regulator for USB Hub Controller
- Overcurrent Logic Outputs
- 4.5-V to 5.5-V Operating Range
- CMOS- and TTL-Compatible Enable Inputs
- 185 uA Bus-Power Supply Current
- Available in 24-Pin SSOP Package
- -40°C to 85°C Ambient Temperature Range
