The devices are USB dedicated charging port (DCP) controllers. An auto-detect feature monitors USB data line voltage, and automatically provides the correct electrical signatures on the data lines to charge compliant devices among the following dedicated charging schemes:

Divider 1 DCP, required to apply 2 V and 2.7 V on the D+ and D– Lines respectively (TPS2513, TPS2514) Divider 2 DCP, required to apply 2.7 V and 2 V on the D+ and D– Lines respectively (TPS2513, TPS2514) Divider 3 DCP, required to apply 2.7 V and 2.7 V on the D+ and D- Lines respectively (TPS2513A, TPS2514A) BC1.2 DCP, required to short the D+ Line to the D– Line Chinese Telecom Standard YD/T 1591-2009 Shorted Mode, required to short the D+ Line to the D– Line 1.2 V on both D+ and D– Lines

• Supports USB DCP Shorting D+ Line to D– Line per USB Battery Charging Specification, Revision 1.2 (BC1.2)
• Supports Shorted Mode (Shorting D+ Line to D– Line) per Chinese Telecommunication Industry Standard YD/T 1591-2009
• Supports USB DCP Applying 2.7 V on D+ Line and 2 V on D– line (or USB DCP Applying 2 V on D+ Line and 2.7 V on D– Line) (TPS2513, TPS2514)
• Supports USB DCP Applying 2.7 V on D+ Line and 2.7 V on D‐ Line (TPS2513A, TPS2514A)
• Supports USB DCP Applying 1.2 V on D+ and D– Lines
• Automatically Switch D+ and D– Lines Connections for an Attached Device
• Dual USB Port Controller (TPS2513, TPS2513A)
• Single USB Port Controller (TPS2514, TPS2514A)
• Operating Range: 4.5 V to 5.5 V
• Available in SOT23-6 Package

• RF430CL330H - 动态 NFC 接口转发器
• DAC38J84 - 四通道、16 位、1.6/2.5 GSPS 数模转换器
• SN74ALS667 - 具有三态输出的八路 D 类透明读回锁存器
• ADS1247 - 极低噪音、精密 24 位 模数转换器
• TPA4861 - 1W 单声道音频功率放大器
• SN74AS832B - 六路 2 输入或驱动器
• SN54S258 - 四路 2 线路至 1 线路数据选择器/多路复用器
• ADS58H43 - 四路 250MSPS 接收器和反馈 IC
• CD74AC138 - 3 线路至 8 线路反向解码器/多路解复用器
• TS5A3167 - 1Ω SPST 模拟开关 5V/3.3V 单通道模拟开关