TPS3306-18 - 具有电源故障的双路处理器监控电路

TPS3306-18是TI德州仪器公司的一款无产品，TPS3306-18是具有电源故障的双路处理器监控电路，本站介绍了TPS3306-18的封装应用图解、特点和优点、功能等，并给出了与TPS3306-18相关的TI元器件型号供参考。

TPS3306-18 - 具有电源故障的双路处理器监控电路 - 无 - 监控器和复位IC - 德州仪器

产品描述

The TPS3306 family is a series of supervisory circuits designed for circuit initialization which require two supply voltages, primarily in DSP and processor-based systems.

The product spectrum of the TPS3306-xx is designed for monitoring two independent supply voltages of 3.3 V/1.5 V, 3.3 V/1.8 V, 3.3 V/2 V, 3.3 V/2.5 V, or 3.3 V/5 V.

The various supervisory circuits are designed to monitor the nominal supply voltage.

During power-on, RESET is asserted when the supply voltage VDD becomes higher than 1.1 V. Thereafter, the supervisory circuits monitor the SENSEn inputs and keep RESET active as long as SENSEn remains below the threshold voltage VIT.

An internal timer delays the return of the RESET output to the inactive state (high) to ensure proper system reset. The delay time, td(typ) = 100 ms, starts after SENSE1 and SENSE2 inputs have risen above the threshold voltage VIT. When the voltage at SENSE1 or SENSE2 input drops below the threshold voltage VIT, the output becomes active (low) again.

The integrated power-fail (PFI) comparator with separate open-drain (PFO) output can be used for low-battery detection, power-fail warning, or for monitoring a power supply other than the main supply.

The TPS3306-xx devices integrate a watchdog timer that is periodically triggered by a positive or negative transition of WDI. When the supervising system fails to retrigger the watchdog circuit within the time-out interval, tt(out) = 0.50 s, RESET becomes active for the time period td. This event also reinitializes the watchdog timer. Leaving WDI unconnected disables the watchdog.

The TPS3306-xx devices are available in either 8-pin MSOP or standard 8-pin SO packages, and are characterized for operation over a temperature range of -40°C to +85°C.

产品特性

Dual Supervisory CircuitsWith Power-Fail for DSP and Processor-Based Systems
Voltage Monitor for Power-Fail or Low-Battery Warning
Watchdog Timer With 0.8 Second Time-Out
Power-On Reset Generator With Integrated 100 ms Delay Time
Open-Drain Reset and Power-Fail Output
Supply Current of 15 µA (Typ.)
Supply Voltage Range: 7 V to 6 V
Defined RESET Output From VDD ≥ 1.1 V
MSOP-8 and SO-8 Packages
Temperature Range: -40°C to +85°C
APPLICATIONS
- Multivoltage DSPs and Processors
- Portable Battery-Powered Equipment
- Embedded Control Systems
- Intelligent Instruments
- Automotive Systems

All trademarks are the property of their respective owners.

下面可能是您感兴趣的TI德州仪器公司无元器件

TI公司产品现货专家，订购TI公司产品不限最低起订量，TI芯片大陆现货即时发货，香港库存3-5天发货，海外库存7-10天发货

寻找全球TI代理商现货货源 - TI公司（德州仪器）电子元件在线订购