As a member of the SWIFT™ family of DC/DC regulators, the TPS5410 is a high-output-current PWM converter that integrates a low resistance high side N-channel MOSFET. Included on the substrate with the listed features is a high performance voltage error amplifier that provides tight voltage regulation accuracy under transient conditions; an undervoltage-lockout circuit to prevent start-up until the input voltage reaches 5.5 V; an internally set slow-start circuit to limit inrush currents; and a voltage feed-forward circuit to improve the transient response. Using the ENA pin, shutdown supply current is reduced to 18 µA typically. Other features include an active high enable, overcurrent limiting, overvoltage protection and thermal shutdown. To reduce design complexity and external component count, the TPS5410 feedback loop is internally compensated.

The TPS5410 device is available in an easy to use 8-pin SOIC package. TI provides evaluation modules and software tools to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles.

• Qualified for Automotive Applications
• Wide Input Voltage Range: 5.5 V to 36 V
• Up to 1-A Continuous (1.2-A Peak) Output Current
• High Efficiency up to 95% enabled by 110-m Integrated MOSFET Switch
• Wide Output Voltage Range: Adjustable Down to 1.22 V with 1.5% Initial Accuracy
• Internal Compensation Minimizes External Parts Count
• Fixed 500-kHz Switching Frequency for Small Filter Size
• Improved Line Regulation and Transient Response by Input Voltage Feed Forward
• System Protected by Over Current Limiting, Over Voltage Protection and Thermal Shutdown
• –40°C to 125°C Operating Junction Temperature Range
• Available in Small 8-Pin SOIC Package
• For SWIFT Documentation, Application Notes and Design Software, See the TI Website at www.ti.com/swift
• APPLICATIONS
  • Consumer: Set-top Box, DVD, LCD Displays
  • Industrial and Car Audio Power Supplies
  • Battery Chargers, High Power LED Supply
  • 12-V/24-V Distributed Power Systems

SWIFT is a trademark of Texas Instruments.

• ADC34J42 - 四通道 14 位 80 160 Msps 模数转换器
• ATL432 - 2.5V 精密可编程的并联稳压器，IREF 0.25uA，IKMIN 40uA
• TPS53321 - 具有集成 MOSFET 的 2.9V 至 6V、5A 降压转换器
• PCM5141 - 具有 PCM 接口和完全可编程 miniDSP 的 2V RMS DIRECTPATH 106dB 音频立体声 DAC
• SN74AHC1G86-Q1 - 汽车类单路 2 输入异或门
• TPS62732 - 用于超低功耗无线应用的具有旁路模式的降压转换器
• UCC2802-Q1 - 汽车类低功耗 BiCMOS 电流模式 PWM
• CD4071B - CMOS 四路 2 输入或门
• BQ4802LY - 符合 Y2K 的并行 RTC，具有 CPU 监控器和外部 NVSRAM 控制，3V Vcc
• ADS1120 - 具有串行外设接口的低功耗、低噪声、16 位 ADC。