• Qualified for Automotive Applications
• AEC-Q100 Qualified With the Following Results
  • Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature Range
  • Device HBM ESD Classification Level 1B
  • Device CDM ESD Classification Level C4B
• Switched-Mode Regulator
  • 5 V ±2%, Normal Mode
  • 5 V ±3%, Low-Power or Crossover Mode
• Switching Frequency, 440 kHz (Typical)
• Input Operating Range, 1.5 V to 40 V, (Vdriver)
  • 500-mA Load-Current Capability
  • 200-mA Load-Current Capability Down to 2-V Input (Vdriver)
  • 120-mA Load-Current Capability Down to 1.5-V Input (Vdriver)
• Enable Function
• Low-Power Operation Mode
• Switched 5-V Regulated Output on 5Vg With Current Limit
• Programmable Slew Rate and Frequency Modulation for EMI Consideration
• Reset Function With Deglitch Timer and Programmable Delay
• Alarm Function for Undervoltage Detection and Indication
• Thermally Enhanced Package for Efficient Heat Management

• Automotive Infotainment and Cluster
• 12-V Industrial Power Systems
• Servers

The TPS55065 is a switched-mode regulator with integrated switches for voltage-mode control. With the aid of external components (LC combination), the device regulates the output to 5 V ±3% for a wide input-voltage range.

The TPS55065 device offers a reset function to detect and indicate when the 5-V output rail is outside of the specified tolerance. This reset delay is programmable using an external timing capacitor on the REST terminal. Additionally, an alarm (AOUT) feature is activated when the input supply rail Vdriver is below a prescaled specified value (set by the AIN terminal).

The TPS55065 device has a frequency-modulation scheme to minimize EMI. The clock modulator permits a modulation of the switching frequency to reduce interference energy in the frequency band.

The 5-Vg output is a switched 5-V regulated output with internal current limiting to prevent assertion of RESET when powering a capacitive load on the supply line. This function is controlled by the 5Vg_ENABLE terminal. If there is a short to ground on this output (5Vg output), the output self-protects by operating in a chopping mode. This does, however, increase the output ripple voltage on VOUT during this fault condition.