TPS61030 - 采用 TSSOP-16 封装、具有 20μA Iq、可调节、4A 开关的 96% 高效升压转换器

TPS61030是TI德州仪器公司的一款转换器（集成开关）产品，TPS61030是采用 TSSOP-16 封装、具有 20μA Iq、可调节、4A 开关的 96% 高效升压转换器，本站介绍了TPS61030的封装应用图解、特点和优点、功能等，并给出了与TPS61030相关的TI元器件型号供参考。

TPS61030 - 采用 TSSOP-16 封装、具有 20μA Iq、可调节、4A 开关的 96% 高效升压转换器 - 转换器（集成开关） - DC/DC开关稳压器 - 德州仪器

产品特性

96% Efficient Synchronous Boost Converter With 1000-mA Output Current From 1.8-V Input
Device Quiescent Current: 20-µA (Typ)
Input Voltage Range: 1.8-V to 5.5-V
Fixed and Adjustable Output Voltage Options Up to 5.5-V
Power Save Mode for Improved Efficiency at Low Output Power
Low Battery Comparator
Low EMI-Converter (Integrated Antiringing Switch)
Load Disconnect During Shutdown
Over-Temperature Protection
Available in a Small 4 mm x 4 mm QFN-16 or in a TSSOP-16 Package

产品应用

All Single Cell Li or Dual Cell Battery Operated Products as MP-3 Player, PDAs, and Other Portable Equipment

产品说明

The TPS6103x devices provide a power supply solution for products powered by either a one-cell Li-Ion or Li-polymer, or a two to three-cell alkaline, NiCd or NiMH battery. The converter generates a stable output voltage that is either adjusted by an external resistor divider or fixed internally on the chip. It provides high efficient power conversion and is capable of delivering output currents up to 1 A at 5 V at a supply voltage down to 1.8 V. The implemented boost converter is based on a fixed frequency, pulse-width- modulation (PWM) controller using a synchronous rectifier to obtain maximum efficiency. At low load currents the converter enters Power Save mode to maintain a high efficiency over a wide load current range. The Power Save mode can be disabled, forcing the converter to operate at a fixed switching frequency. It can also operate synchronized to an external clock signal that is applied to the SYNC pin. The maximum peak current in the boost switch is limited to a value of 4500 mA.

The converter can be disabled to minimize battery drain. During shutdown, the load is completely disconnected from the battery. A low-EMI mode is implemented to reduce ringing and, in effect, lower radiated electromagnetic energy when the converter enters the discontinuous conduction mode.

产品器件信息

PART NUMBER	PACKAGE	BODY SIZE (NOM)
TPS61030	TSSOP (16)	5.00 mm × 4.40 mm
TPS61031
TPS61032
TPS61030	QFN (16)	4.00 mm x 4.00 mm
TPS61031
TPS61032

下面可能是您感兴趣的TI德州仪器公司转换器（集成开关）元器件

TI公司产品现货专家，订购TI公司产品不限最低起订量，TI芯片大陆现货即时发货，香港库存3-5天发货，海外库存7-10天发货

寻找全球TI代理商现货货源 - TI公司（德州仪器）电子元件在线订购