• Linear Charger Management for Single Li-Ion or Li-Polymer Cells
• Dual Input Ports for Charging From USB or From Wall Plug, Handles 100-mA and 500-mA USB Requirements
• Charge Current Programmable Through External Resistor
• 1-A, 95% Efficient Step-Down Converter for I/O and Peripheral Components (VMAIN)
• 400-mA, 90% Efficient Step-Down Converter for Processor Core (VCORE)
• 2x 200-mA LDOs for I/O and Peripheral Components, LDO Enable Through Bus
• Serial Interface Compatible With I2C, Supports 100-kHz, 400-kHz Operation
• LOW_PWR Pin to Lower or Disable Processor Core Supply Voltage in Deep Sleep Mode
• 70-µA Quiescent Current
• 1% Reference Voltage
• Thermal Shutdown Protection

• All Single Li-Ion Cell Operated Products Requiring Multiple Supplies Including:
  • PDA
  • Cellular and Smart Phone
  • Internet Audio Player
  • Digital Still Camera
• Digital Radio Player
• Split Supply DSP and µP Solutions

The TPS65010 device is an integrated power and battery management IC for applications powered by one Li-Ion or Li-Polymer cell, and which require multiple power rails. The TPS65010 provides two highly efficient, 1.25-MHz step-down converters targeted at providing the core voltage and peripheral, I/O rails in a processor-based system. Both step-down converters enter a low-power mode at light load for maximum efficiency across the widest possible range of load currents. The TPS65010 also integrates two 200-mA LDO voltage regulators, which are enabled through the serial interface. Each LDO operates with an input voltage range from 1.8 V to 6.5 V, thus allowing them to be supplied from one of the step-down converters or directly from the battery.

The TPS65010 also has a highly integrated and flexible Li-Ion linear charger and system power management. It offers integrated USB-port and AC-adapter supply management with autonomous power-source selection, power FET and current sensor, high accuracy current and voltage regulation, charge status, and charge termination.