TPS73733-Q1是TI公司的一款单通道LDO产品，TPS73733-Q1是汽车类 汽车类单输出 LDO、1A、固定电压 (3.3V)、反向电流保护，本页介绍了TPS73733-Q1的产品说明、应用、特性等，并给出了与TPS73733-Q1相关的TI元器件型号供参考。
TPS73733-Q1 - 汽车类 汽车类单输出 LDO、1A、固定电压 (3.3V)、反向电流保护 - 单通道LDO - 线性稳压器(LDO) - TI公司（Texas Instruments，德州仪器）
- Qualified for Automotive Applications
- Stable with 1.0-µF or Larger Ceramic Output Capacitor
- Input Voltage Range: 2.2 V to 5.5 V
- Ultra-Low Dropout Voltage: 130 mV typ at 1 A
- Excellent Load Transient Response, Even With Only 1.0-µF Output Capacitor
- NMOS Topology Delivers Low Reverse Leakage Current
- 1.0% Initial Accuracy
- 3% Overall Accuracy Over Line, Load, and Temperature
- Less Than 20-nA (Typ) Quiescent Current in Shutdown Mode
- Thermal Shutdown and Current Limit for Fault Protection
- Available in Multiple Output Voltage Versions
- Adjustable Output: 1.20 V to 5.5 V
- Custom Outputs Available Using Factory Package-Level Programming
- APPLICATIONS
- Point of Load Regulation for DSPs, FPGAs, ASICs, and Microprocessors
- Post-Regulation for Switching Supplies
- Portable/Battery-Powered Equipment
All other trademarks are the property of their respective owners.
DESCRIPTION/ORDERING INFORMATION
The TPS737xx family of linear low-dropout (LDO) voltage regulators uses an NMOS pass element in a voltage-follower configuration. This topology is relatively insensitive to output capacitor value and ESR, allowing a wide variety of load configurations. Load transient response is excellent, even with a small 1.0-µF ceramic output capacitor. The NMOS topology also allows very low dropout.
The TPS737xx family uses an advanced BiCMOS process to yield high precision while delivering very low dropout voltages and low ground pin current. Current consumption, when not enabled, is under 20 nA and ideal for portable applications. These devices are protected by thermal shutdown and foldback current limit.
