TS3USB30E - 具有单独使能和 ESD 保护的高速 USB 2.0 1:2 多路复用/多路解复用开关

TS3USB30E是TI德州仪器公司的一款USB/MHL开关产品，TS3USB30E是具有单独使能和 ESD 保护的高速 USB 2.0 1:2 多路复用/多路解复用开关，本站介绍了TS3USB30E的封装应用图解、特点和优点、功能等，并给出了与TS3USB30E相关的TI元器件型号供参考。

TS3USB30E - 具有单独使能和 ESD 保护的高速 USB 2.0 1:2 多路复用/多路解复用开关 - USB/MHL开关 - USB - 德州仪器

产品描述

The TS3USB30E is a high-bandwidth 1:2 switch specially designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os. The wide bandwidth (900 MHz) of this switch allows signals to pass with minimum edge and phase distortion. The device multiplexes differential outputs from a USB host device to one of two corresponding outputs, or from two different hosts to one corresponding output. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. It is designed for low bit-to-bit skew and high channel-to-channel noise isolation, and is compatible with various standards, such as high-speed USB 2.0 (480 Mbps).

The TS3USB30E integrates ESD protection cells on all pins, is available in a tiny UQFN package (1.8 mm × 1.4 mm) or a VSSOP package, and is characterized over the free-air temperature range of –40°C to 85°C.

产品特性

VCC Operation at 3 V to 4.3 V
D+/D– Pins Tolerate up to 5.25 V
1.8-V Compatible Control-Pin Inputs
IOFF Supports Partial Power-Down-Mode Operation
RON = 10 Ω Maximum
ΔRON = 0.35 Ω Typical
Cio(ON) = 7.5 pF Typical
Low Power Consumption (1 µA Maximum)
–3-dB Bandwidth = 900 MHz Typical
Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II(1)
ESD Performance Tested Per JESD 22
- 8000-V Human-Body Model (A114-B, Class II)
- 1000-V Charged-Device Model (C101)
ESD Performance I/O Port to GND(2)
- 15000-V Human-Body Model
Packaged in 10-pin UQFN (1.4 mm × 1.8 mm)

下面可能是您感兴趣的TI德州仪器公司USB/MHL开关元器件

TI公司产品现货专家，订购TI公司产品不限最低起订量，TI芯片大陆现货即时发货，香港库存3-5天发货，海外库存7-10天发货

寻找全球TI代理商现货货源 - TI公司（德州仪器）电子元件在线订购