UC2823 - 高速 PWM 控制器

UC2823是TI德州仪器公司的一款PWM与谐振控制器产品，UC2823是高速 PWM 控制器，本站介绍了UC2823的封装应用图解、特点和优点、功能等，并给出了与UC2823相关的TI元器件型号供参考。

UC2823 - 高速 PWM 控制器 - PWM与谐振控制器 - 离线隔离型DC/DC控制器和转换器 - 德州仪器

产品描述

The UC1823 family of PWM control ICs is optimized for high frequency switched mode power supply applications. Particular care was given to minimizing propagation delays through the comparators and logic circuitry while maximizing bandwidth and slew rate of the error amplifier. This controller is designed for use in either current-mode or voltage-mode systems with the capability for input voltage feed-forward.

Protection circuitry includes a current limit comparator, a TTL compatible shutdown port, and a soft start pin which will double as a maximum duty cycle clamp. The logic is fully latched to provide jitter free operation and prohibit multiple pulses at the output. An under-voltage lockout section with 800mV of hysteresis assures low start up current. During under-voltage lockout, the output is high impedance. The current limit reference (pin 11) is a DC input voltage to the current limit comparator. Consult specifications for details.

These devices feature a totem pole output designed to source and sink high peak currents from capacitive loads, such as the gate of a power MOSFET. The on state is defined as a high level.

产品特性

Compatible with Voltage or Current-Mode Topologies
Practical Operation @ Switching Frequencies to 1.0MHz
50ns Propagation Delay to Output
High Current Totem Pole Output (1.5A peak)
Wide Bandwidth Error Amplifier
Fully Latched Logic with Double Pulse Suppression
Pulse-by-Pulse Current Limiting
Soft Start/Max. Duty Cycle Control
Under-Voltage Lockout with Hysteresis
Low Start Up Current (1.1mA)
Trimmed Bandgap Reference (5.1V ±1%)

下面可能是您感兴趣的TI德州仪器公司PWM与谐振控制器元器件

TI公司产品现货专家，订购TI公司产品不限最低起订量，TI芯片大陆现货即时发货，香港库存3-5天发货，海外库存7-10天发货

寻找全球TI代理商现货货源 - TI公司（德州仪器）电子元件在线订购