UC385-ADJ是TI公司的一款单通道LDO产品，UC385-ADJ是单输出 LDO、5.0A、可调节电压（1.22 至 6.0V）、快速瞬态响应、反向电流保护，本页介绍了UC385-ADJ的产品说明、应用、特性等，并给出了与UC385-ADJ相关的TI元器件型号供参考。
UC385-ADJ - 单输出 LDO、5.0A、可调节电压（1.22 至 6.0V）、快速瞬态响应、反向电流保护 - 单通道LDO - 线性稳压器(LDO) - TI公司（Texas Instruments，德州仪器）
The UC385 is a low dropout linear regulator providing a quick response to fast load changes. Combined with its precision onboard reference, the UC385 excels at driving GTL and BTL buses. Due to its fast response to load transients, the total capacitance required to decouple the regulator’s output can be significantly decreased when compared to standard LDO linear regulators.
Dropout voltage (VIN to VOUT) is only 490 mV maximum and 350 mV typical at 5-A load (0°C to 100°C).
The onboard bandgap reference is stable with temperature and scaled for a 1.2 V input to the internal power amplifier. The UC385 is available in fixed output voltages of 1.5 V, 2.1 V, or 2.5 V. The output voltage of the adjustable version can be set with two external resistors. If the external resistors are omitted, the output voltage defaults to 1.2 V.
- Fast Transient Response
- 10-mA to 5-A Load Current
- Short Circuit Protection
- Maximum Dropout of 500-mV at 5-A Load Current
- Separate Bias (VB) and VIN Pins
- Available in Adjustable or Fixed Output Voltages
- 5-Pin Package Allows Kelvin Sensing of Load Voltage
- Reverse Current Protection
All trademarks are the property of their respective owners.
